User Guide

256 Chapter 6 - Removal and replacement EN

Internal printer hard disk (DN model)

If the internal printer hard disk needs to be repaired or replaced, all

data stored on the hard disk will be lost. Download fonts and other

information as necessary.

1 Remove the formatter board from the printer (see page 254).

2 Unplug one connector (callout 1).

Figure 106. Connector on formatter board

3 On the other side of the formatter board, release the two tabs with

your fingers (callout 2).

Figure 107. Back side of formatter board

4 With the other hand, pull the hard disk out from the other side.

CAUTION Take care not to damage the plastic retaining clips on the hard disk.