User Guide

316 Chapter 6 - Removal and replacement EN
Top cover
1 Remove the front and back covers (see page 315).
2 Disconnect the cable from the LED PCA (callout 1, at the upper-
front side of the frame).
Figure 165. Top cover
3 Remove one screw that secures the LED PCA to the frame
(callout 2).
4 Remove two screws close to the upper-right side (callout 3).
5 Slide the top cover to the left side of the unit, then lift it up and out
of the frame.
2
3
2
2
2
1