User Guide

318 Chapter 6 - Removal and replacement EN
Paper bins and blind cover
The procedure for removing the paper bins and the blind cover is the
same. Each bin rests in its labeled slot.
1 Remove the face-up bin first. Lift the outer edge of the bin to clear
the retaining notch in the frame, and then pull the bin away from
the frame.
2 Remove the blind cover.
Figure 167. Paper bins
3 Remove each face-down bin, starting at the top and working
down in sequence.
Notes about reinstalling:
Slide a bin into its designated slot, and then lower the bin into the
retaining notch in the frame.
Replace the paper bins, beginning with the bottom face-down bin
and continuing upward in order. Be sure to place the blind cover
between face-down bin 1 and the face-up bin.