User Guide

EN Multi-bin mailbox 327
Controller PCA
1 Disconnect the power cable (callout 1).
Figure 177. Controller PCA (1 of 2)
2 Disconnect the C-link cable (callout 2).
3 Remove all paper bins and the blind cover (see page 318).
4 Carefully lay the multi-bin mailbox on its front side.
5 Loosen one grounding screw and two self-tapping screws on the
right side of the PCA cover (callout 3).
6 Remove two self-tapping screws and the grounding cable from
the left side of the PCA cover (callout 4).
7 Open the cover to reveal the PCA.
Notes about reinstalling:
Reinstall the grounding cable.
2
2
2
2
3
1
2
3