User Guide

34 Chapter 1 - Product information EN
Printable area
Print areas shown in the table below are defined as follows:
Non-masked area—the maximum area in which image signals
are not masked by the compulsory formation of blank image area
(this is the maximum area that can be addressed by the laser
beam).
Recommended print area—the maximum area in which image
signals can be printed on media without any loss of image
signals, excluding manual feed.
Image assurance area—the maximum area in which print quality
can be assured, including manual feed.
Table 10. Printable area specification
Media type
Margin
Top Bottom Left Right
Non-masked print
area
Cut sheet
Envelope
2.1 mm
(0.083 inch)
2.1 mm
(0.083 inch)
2.9 mm
(0.114 inch)
2.6 mm
(0.102 inch)
3.2 mm
(0.126 inch)
3.3 mm
(0.130 inch)
3.7 mm
(0.146 inch)
3.5 mm
(0.138 inch)
Recommended
print area
Cut sheet
Envelope
3.0 mm
(0.118 inch)
8.0 mm
(0.315 inch)
6.0 mm
(0.236 inch)
10.5 mm
(0.413 inch)
4.0 mm
(0.157 inch)
8.5 mm
(0.335 inch)
4.5 mm
(0.177 inch)
9.5 mm
(0.374 inch)
Image assurance
area
Cut sheet
Envelope
6.0 mm
(0.236 inch)
15.0 mm
(0.591 inch)
6.0 mm
(0.236 inch)
15.0 mm
(0.591 inch)
5.0 mm
(0.197 inch)
15.0 mm
(0.591 inch)
5.0 mm
(0.197 inch)
15.0 mm
(0.591 inch)