User Guide

EN Printer message troubleshooting 403
LEFT
OUTPUT BIN FULL
Event log message: None
Description:
The left (face-up) output bin on the printer is full.
Note: This message appears only if the optional
multi-bin mailbox is installed.
Action:
Remove all media from the left (face-up) output bin
of the printer to continue printing.
LOCK TONER LEVER
Event log message: None
Description:
The blue lever inside the clear door is not locked.
Action:
1 Open the front door of the printer, open the
clear door, and swing the blue toner lock lever
on the carousel to the right.
2 Remove the toner cartridge, and then reinstall
it, making sure the cartridge is all the way in
the printer.
3 Swing the blue toner lock lever on the carousel
to the left until it clicks, and then close the clear
and front doors.
MAILBOX
COMM ERROR
CHECK CABLES
CYCLE POWER
Event log message: None
Description:
Communication with the multi-bin mailbox has been
lost.
Action:
1 Verify all cables are connected correctly.
2 Turn the printer off and on to reset the printer.
MAILBOX <x>
OUTPUT BIN FULL
Event log message: None
Description:
A mailbox in the multi-bin mailbox is full.
<x> = Mailbox 1 through 8
Action:
Remove all media from the multi-bin mailbox to
continue printing.
MAILBOX NOT
ATTACHED
Event log message: None
Description:
The multi-bin mailbox is not correctly attached to the
printer. The printer will print to the top (face-down)
output bin when in this state.
Action:
Push the multi-bin mailbox up against printer.
Table 42. Unnumbered printer messages (continued)