HP Color LaserJet CM1015 MFP/CM1017 MFP Software Technical Reference
HP Color LaserJet CM1015 MFP/CM1017 MFP Software Technical Reference
Trademark credits Copyright and license ©2006 Copyright Hewlett-Packard Development Company, L.P. Adobe®, Adobe Photoshop®, Acrobat®, PostScript®, and the Acrobat logo® are trademarks of Adobe Systems Incorporated. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Corel® is a trademark or registered trademark of Corel Corporation or Corel Corporation Limited.
Table of contents 1 Purpose and scope Introduction ........................................................................................................................................... 1 Device features .................................................................................................................................... 4 Available product configurations ..........................................................................................................
Support .............................................................................................................. 34 Settings ............................................................................................................. 34 Scan settings .................................................................................... 34 Print Settings .................................................................................... 38 Image Transfer Settings .......................................
Print Quality ...................................................................................... 78 Print Density ..................................................................................... 79 Paper Types ..................................................................................... 81 System Setup ................................................................................... 82 Service ..............................................................................................
Network Summary page .................................................................................. 115 Optional software ............................................................................................................................. 117 HP PhotoSmart Premier .................................................................................................. 117 HP Marketing Assistant ...................................................................................................
Save Options .................................................................................. 188 Additional options ........................................................................... 189 Document preview image ............................................................... 190 OK, Help, and Cancel ..................................................................... 191 E-mail ........................................................................................................................
Type new Quick Set name here ...................................................................... 215 Paper Options group box ................................................................................................. 215 Size is: drop-down menu ................................................................................. 216 Use Different Paper/Covers check box ........................................................... 217 Source Is: drop-down menu .............................................
Landscape option button ................................................................................. 239 Rotate by 180 degrees check box ................................................................... 240 Mirror Image check box (PS Emulation Unidriver only) .................................. 240 Color tab features (HP PCL 6 Unidriver and PS Emulation Unidriver only) ..................................... 241 Print Task Quick Sets ......................................................................
Accessing Memory Cards through the Macintosh (HP Color LaserJet CM1017 MFP only) .......................................................................... 261 System requirements ....................................................................................................... 262 Operating-system support ............................................................................................... 262 Availability ......................................................................................
OVERVIEW OF THE PRINTING-SYSTEM COMPONENTS .......................... 295 End-user software components in a Recommended install ........... 295 End-user software components available for a Custom install ....... 296 HP ToolboxFX ................................................................................ 297 Adobe Acrobat Reader ................................................................... 297 Device documentation .................................................................... 297 Uninstall .
xii ENWW
List of tables Table 1-1 Software technical reference overview .............................................................................................. 1 Table 1-2 Features of the HP Color LaserJet CM1015 MFP/CM1017 MFP ..................................................... 4 Table 1-3 Software features by connection type ................................................................................................ 7 Table 1-4 Multitasking capabilities ...............................................
xiv ENWW
List of figures Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9 Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13 Figure 2-14 Figure 2-15 Figure 2-16 Figure 2-17 Figure 2-18 Figure 2-19 Figure 2-20 Figure 2-21 Figure 2-22 Figure 2-23 Figure 2-24 Figure 2-25 Figure 2-26 Figure 2-27 Figure 2-28 Figure 2-29 Figure 2-30 Figure 2-31 Figure 2-32 Figure 2-33 Figure 2-34 Figure 2-35 Figure 2-36 Figure 2-37 Figure 2-38 Figure 2-39 Figure 2-40 ENWW HP Solution Cente
Figure 2-41 Figure 2-42 Figure 2-43 Figure 2-44 Figure 2-45 Figure 2-46 Figure 2-47 Figure 2-48 Figure 2-49 Figure 2-50 Figure 2-51 Figure 2-52 Figure 2-53 Figure 2-54 Figure 2-55 Figure 2-56 Figure 2-57 Figure 2-58 Figure 2-59 Figure 2-60 Figure 2-61 Figure 2-62 Figure 2-63 Figure 2-64 Figure 2-65 Figure 2-66 Figure 2-67 Figure 2-68 Figure 2-69 Figure 2-70 Figure 2-71 Figure 2-72 Figure 2-73 Figure 2-74 Figure 2-75 Figure 2-76 Figure 2-77 Figure 2-78 Figure 2-79 Figure 2-80 Figure 2-81 Figure 2-82 Figure 2
Figure 2-91 HP EWS – Password page ......................................................................................................... 110 Figure 2-92 HP EWS – Printing page ............................................................................................................. 111 Figure 2-93 HP EWS – PCL5c page .............................................................................................................. 111 Figure 2-94 HP EWS – PostScript page ..................................
Figure 3-34 Network install – Identify Printer dialog box ................................................................................ 154 Figure 3-35 Network install – Firewall Detected dialog box ........................................................................... 155 Figure 3-36 Network install – Searching dialog box ....................................................................................... 155 Figure 3-37 Network install – Specify Printer dialog box ..............................
Figure 4-5 Figure 4-6 Figure 4-7 Figure 5-1 Figure 5-2 Figure 5-3 Figure 5-4 Figure 5-5 Figure 5-6 Figure 5-7 Figure 5-8 Figure 5-9 Figure 5-10 Figure 5-11 Figure 5-12 Figure 5-13 Figure 5-14 Figure 5-15 Figure 5-16 Figure 5-17 Figure 5-18 Figure 5-19 Figure 5-20 Figure 5-21 Figure 5-22 Figure 5-23 Figure 5-24 Figure 5-25 Figure 5-26 Figure 6-1 Figure 6-2 Figure 6-3 Figure 6-4 Figure 6-5 Figure 6-6 Figure 6-7 Figure 6-8 Figure 6-9 Figure 6-10 Figure 6-11 Figure 6-12 Figure 6-13 Figure 6-14 Figure 6-15 Figur
xx ENWW
Purpose and scope 1 Purpose and scope Introduction This Software Technical Reference (STR) provides information about and troubleshooting tips for the printing-system software for the HP Color LaserJet CM1015 MFP/CM1017 MFP. This document is prepared in an electronic format to serve as a quick-reference tool for Customer Care Center (CCC) agents, support engineers, system administrators, Management Information Systems (MIS) personnel, and end users, as appropriate.
Purpose and scope Table 1-1 Software technical reference overview (continued) Chapter Content ● Driver configuration for Microsoft Windows® ● Optional software, including HP Photosmart Premier, HP Document Viewer, HP Marketing Assistant, and Readiris Professional V11.0 text-recognition software by IRIS.
ENWW Available product configurations ● Printing-system software ● HP LaserJet documentation Purpose and scope ● Introduction 3
Purpose and scope Device features The following table contains descriptions of the HP Color LaserJet CM1015 MFP/CM1017 MFP that is described in this STR.
Feature HP Color LaserJet CM1015 MFP/CM1017 MFP HP product number HP Color LaserJet CM1015 MFP (CB394A) Purpose and scope Table 1-2 Features of the HP Color LaserJet CM1015 MFP/CM1017 MFP (continued) HP Color LaserJet CM1017 MFP (CB395A) Paper handling Print Copy Scan ENWW ● Single-sheet priority-feed slot (tray 1) ● 250-sheet universal tray (tray 2) ● Optional 250-sheet universal tray (optional tray 3) ● Trays 1 and 2 for letterhead, envelopes, labels, transparencies, custom-sized media,
Purpose and scope Table 1-2 Features of the HP Color LaserJet CM1015 MFP/CM1017 MFP (continued) Feature HP Color LaserJet CM1015 MFP/CM1017 MFP HP product number HP Color LaserJet CM1015 MFP (CB394A) HP Color LaserJet CM1017 MFP (CB395A) Energy savings Supplies Accessibility 1 2 3 6 ● The HP Color LaserJet CM1015 MFP/CM1017 MFP automatically conserves electricity by substantially reducing power consumption when it is not in use. ● Meets ENERGY STAR® guidelines for energy efficiency.
Purpose and scope Available product configurations This section contains information about the following topics: ● Software features by connection type ● Multitasking capabilities ● Differences between the network-connected and direct-connected configurations Software features by connection type The HP Color LaserJet CM1015 MFP/CM1017 MFP products can function in one of three installations: ● As a standalone copier not connected to a computer. ● Directly connected to a computer.
Purpose and scope The HP Color LaserJet CM1015 MFP/CM1017 MFP perform multiple tasks such as printing, scanning, and copying. Depending on which functions are in use, the HP Color LaserJet CM1015 MFP/CM1017 MFP can perform many functions at the same time. This high level of multitasking is made possible by a scan location that is separate from the paper path.
Purpose and scope Printing-system software The HP Color LaserJet CM1015 MFP/CM1017 MFP includes the following software components and programs for Microsoft Windows operating systems. Table 1-5 Software components for Microsoft Windows Components Description HP installer Installs the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software based on the hardware it detects from the host computer.
Purpose and scope Table 1-5 Software components for Microsoft Windows (continued) Components Description Online Help Provides help for using the software for the HP Color LaserJet CM1015 MFP/CM1017 MFP product. The user documentation for these products is included on the installation CD as both .CHM (online help) files and Adobe Acrobat® .PDF files. A Web browser must be installed on the computer in order to view the contents from any .CHM file.
Microsoft Windows ● IA-64 ● Linux ● UNIX ● Microsoft Windows Terminal Server and Citrix Metaframe Purpose and scope ● Microsoft Windows NOTE For information about the HP Color LaserJet CM1015 MFP/CM1017 MFP printingsystem software for Macintosh operating systems, see Macintosh. In Microsoft Windows systems, the HP Color LaserJet CM1015 MFP/CM1017 MFP software installer presents the user with the option of installing a Recommended installation or a Custom installation.
Purpose and scope System requirements for a Recommended – Minimum installation ● Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows XP x64, or Microsoft Windows Server 2003 operating system ● 50 MB of available hard disk space ● 233 MHz processor speed ● Pentium II, K6, or Transmeta 5400 processor or greater, with 54 MB of RAM (180 MB recommended) ● 180 MB RAM ● 800x600 16-color display setting ● Microsoft Internet Explorer version 5.50.4134.
The HP Color LaserJet CM1015 MFP/CM1017 MFP print drivers have been tested and have print-only support with Microsoft Windows Terminal Server or Citrix Metaframe. Operating-system support NOTE For information about the HP Color LaserJet CM1015 MFP/CM1017 MFP printingsystem software for Macintosh operating systems, see Macintosh. NOTE The HP Color LaserJet CM1015 MFP/CM1017 MFP does not support the following operating systems: – Windows NT 4.
Purpose and scope Print driver support in other operating systems The following operating systems support add–printer–wizard installations. ● IA-64 (driver available only on the Web) ● Citrix Metaframe ● Microsoft Windows Terminal Server Use the Add Printer Wizard to install the print driver for these operating systems. The print driver for these operating systems is available at the following HP support Web site: www.hp.
Component Microsoft Windows 2000 and Microsoft Windows XP – 32bit Microsoft Wi Microsoft ndows Serv Windows er 2003 XP x64 CD Browser X .INF File (print)3 X X X .
Purpose and scope Table 1-6 Software component availability for the HP Color LaserJet CM1015 MFP/CM1017 MFP (continued) 1 2 3 4 5 6 7 Component Microsoft Windows 2000 and Microsoft Windows XP – 32bit Microsoft Wi Microsoft ndows Serv Windows er 2003 XP x64 Readiris Professional V11.
Purpose and scope The HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software comes on two separate CDs, one for Microsoft Windows and one for Macintosh. For information about the Macintosh CD, see Macintosh. Each CD includes documentation files and files that are required to install and uninstall the printingsystem components. Topics: ● Microsoft Windows CD ● CD versions ● Readiris Pro V11.
Purpose and scope Table 1-7 CD part numbers for the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software for Microsoft Windows Part number Languages included on CD CB394-60113 ● Danish ● Dutch ● English ● Finnish ● French ● German ● Italian ● Norwegian ● Portuguese ● Spanish ● Swedish ● Czech ● English ● Hungarian ● Polish ● Russian ● Turkish ● English ● Korean ● Simplified Chinese ● Traditional Chinese ● Thai CB394-60114 CB394-60115 The followin
Component 1 CS D A DE HP ToolboxFX X X HP Marketing Assistant X X HP Color LaserJet CM1015 MFP Start Guide A R X B G X C A EL EN ES X X X X X X X X X X X X X X X X ET FI FR X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X HE HR X HU ID IT KK X Purpose and scope Table 1-8 Microsoft Windows software component localization by language, A-K (continued) K O X X X X X X X X X X X X X X X X X and HP
Purpose and scope ● ID = Indonesian ● IT = Italian ● KK = Kazakh ● KO = Korean Table 1-9 Microsoft Windows software component localization by language L-Z Component 1 NL NO PL PT HP PCL 6 Unidriver and PS Emulation Unidriver X X X X HP ToolboxFX X X X HP Marketing Assistant X X X HP Color LaserJet CM1015 MFP Start Guide LT X LV X RO SV TH TR X X X X X X X X X X X X X X X X X X X X X X X X X X RU ZH CN ZH TW X X X X X X X X X X X X
Purpose and scope ● SK = Slovak ● SL = Slovenian ● SR = Serbian ● SV = Swedish ● TH = Thai ● TR = Turkish ● VI = Vietnamese ● ZHCN = Simplified Chinese ● ZHTW = Traditional Chinese Readiris Pro V11.0 languages The user interface for Readiris Professional V11.0 text-recognition software by IRIS is available in the following languages.
Purpose and scope 1 2 22 Basque Croatian Galician Italian Manx (Gaelic) Romanian Swahili Byelorussia n-English Tetum Bemba Czech Ganda Javanese Maori Rundi Swedish GreekEnglish SwissGerman Bikol Danish German Kapampan gan Mayan Russian Tagalog Macedonia n-English Kazak Bislama Dutch Greek Kicongo Minangkab au Samoan Tahitian RussianEnglish Brazilian Esperanto Greenlandi c Kinyarwand a Nahuatl Sardinian Tok Pisin SerbianEnglish Breton Estonian Haitian (Creole)
The documentation in the following table is available for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Purpose and scope Table 1-10 User documentation availability and localization (continued) Document name 24 Languages ● Portuguese (Brazilian) ● Spanish ● Danish ● English ● Finnish ● Hebrew ● Greek ● Norwegian ● Swedish ● Arabic ● English ● Estonian ● Kazakh ● Latvian ● Lithuanian ● Russian ● Turkish ● Bulgarian ● Croatian ● Czech ● English ● Hungarian ● Polish ● Romanian ● Slovak ● Slovenian ● Bahasa Indonesian ● English ● Korean ● Simplified Ch
ENWW Document name Languages Part number Location HP Color LaserJet CM1017 MFP Start Guide ● Catalan CB395–90901 ● Dutch ● English ● French The HP Color LaserJet CM1017 MFP Start Guide is available in hard copy and comes in the box with the HP Color LaserJet CM1017 MFP.
Purpose and scope Table 1-10 User documentation availability and localization (continued) Document name 26 Languages Part number ● Bulgarian CB395–90904 ● Croatian ● Czech ● English ● Hungarian ● Polish ● Romanian ● Slovak ● Slovenian ● Bahasa Indonesian ● English ● Korean ● Simplified Chinese ● Thai ● Traditional Chinese ● Vietnamese Chapter 1 Purpose and scope Location CB395–90906 ENWW
Software description Software description 2 Introduction The HP Color LaserJet CM1015 MFP/CM1017 MFP comes with additional software tools to enhance the use of the product.
HP Customer Participation Program HP Customer Participation Program is HP's voluntary program for communication between the computer and HP to help HP monitor toner usage. HP Customer Participation Program is installed automatically with the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software. About two weeks after installation, an option appears on the computer screen allowing users to discontinue participation in the program.
HP Solution Center The HP Solution Center is installed automatically with a full installation of the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software. To start the HP Solution Center, click Start, Programs, HP, and HP Solution Center. Or, double-click the HP Solution Center icon on the desktop shortcut. The following screen appears.
Header area Figure 2-2 Header area – HP Solution Center The header area contains the HP logo and a tab for each HP product that has been connected to the computer at least once. Software description Product information area Figure 2-3 Product Information area – HP Solution Center The product information area contains the product name, model number, and a small photo of the product.
Software description Figure 2-5 Scan picture – HP Solution Center For more information about scanning, see HP LaserJet Scan software. Scan document Click Scan document to scan and edit a text document with or without graphics.
Software description Figure 2-6 HP Solution Center – Scan document For more information about scanning, see HP LaserJet Scan software. Transfer images NOTE This is the recommended method for transferring photos. Digital images can be created and stored on digital imaging devices such as digital cameras and memory cards, and then transferred to a computer for printing or sharing with the HP Photosmart Premier software. Clicking Transfer Images, opens the following screen.
Software description Figure 2-7 Transfer and Print Images screen Utilities Click Utilities to open the HP ToolboxFX for the HP Color LaserJet CM1015 MFP/CM1017 MFP. Use the HP ToolboxFX to monitor the status of the MFP, order supplies, and change configuration settings for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Software description Figure 2-8 HP ToolboxFX Status screen Support If Web access is available, click Support to open the HP support Web page for the HP Color LaserJet CM1015 MFP/CM1017 MFP. Or open the web page directly by going to the following Web site: www.hp.
Software description Figure 2-9 Scan Preferences dialog box – HP Solution Center The Scan Preferences dialog box includes two tabs: Automatic and Quality vs. Speed. However, the HP LaserJet Scan software supports only the options on the Automatic tab. The following options are available. ENWW ● Automatically straighten scanned images ● Automatically adjust exposure ● Automatically adjust color ● Use enhanced color ● Prompt for additional scans from glass/TMA.
● Front Panel Scan Button Settings. Clicking this option opens the Set up the list for the all-in-one. Software description Figure 2-10 Set up the list for the all-in-one – HP Solution Center Use the controls on this dialog box to configure the available locations for the Scan to button on the MFP control panel. ● 36 Solution Center Scan Button Settings. Clicking this option opens the Button Settings dialog box.
Software description Figure 2-11 Scan Picture button tab – Button Settings dialog box – HP Solution Center ENWW HP Solution Center 37
Software description Figure 2-12 Scan Document button tab – Button Settings dialog box – HP Solution Center Use the options on these tabs to configure the default settings for the Scan Picture button and the Scan Document button in the HP Solution Center. Print Settings Click this setting to specify default settings for print jobs, maintain the HP Color LaserJet CM1015 MFP/ CM1017 MFP, or set up a remote print driver, for example, through the HP ToolboxFX.
The following options are available from this menu: Printer settings. Clicking Print Settings opens the following screen in the HP ToolboxFX.
● Printer Toolbox. Clicking Printer Toolbox. opens the following screen in the HP ToolboxFX. Software description Figure 2-14 Device Status screen Image Transfer Settings Click this setting to specify default settings that affect all transfer sessions. The following screen appears in the HP Photosmart Premier software program.
Software description Figure 2-15 Transfer Settings screen Network Settings Click this setting to modify current network settings for the HP Color LaserJet CM1015 MFP/CM1017 MFP. If the device is not set up for networking, a message appears explaining that this feature is not available. CAUTION If you are not familiar with changing network settings, do not modify the settings in the window that appears. Clicking Network Settings opens the following screen.
Software description Figure 2-16 Network Settings screen Status Click Status to open the Device Status screen from the HP ToolboxFX.
Software description Figure 2-17 Device Status screen Shopping area Figure 2-18 Shopping area – HP Solution Center Clicking Shopping opens the Shopping Center.
Software description Figure 2-19 Shopping Center – HP Solution Center The Shopping Center provides links to buy supplies, other HP products, and even prints of photographs online. The links change dynamically according to the location, which is selected in the drop-down menu at the top of the page. Clicking a link without first choosing a country/region, causes the following dialog box to appear.
Check ink / toner levels. Click Check ink / toner levels to open the Device Status page of the HP ToolboxFX. Software description ● Figure 2-21 Check ink / toner levels – HP Solution Center HP Products Shop for any HP product is the only option in this section. Clicking this link opens the Web browser and to the HP Online Store for the country/region.
Order HP Prints Online When you want lots of prints, buy them online! link is the only option in this section. Clicking this link opens the Web browser to the Snapfish.com Web site, a service of HP, where sharing photos, ordering prints, or buying personalized photo gifts becomes available. Software description Figure 2-23 Order HP prints online – HP Solution Center Help and Support area Figure 2-24 Help and support area – HP Solution Center Clicking Help and Support opens the Help and Support screen.
Software description Figure 2-25 Help and Support screen – HP Solution Center The Help and Support screen offers the following options: ● Try these first ● Tools / Utilities ● Documentation ● Online Support Try these first Check for software updates is the only option in this section. Clicking this option launches the HP Software Update utility, which searches the HP web site for software updates for the product.
Software description Figure 2-26 HP Software Update – HP Solution Center Tools / Utilities The Tools / Utilities section contains the following options. ● Printer Toolbox and Status.Clicking either of these links opens the Device Status page in the HP ToolboxFX.
Technical Information. Clicking this link opens the Troubleshooting page in the HP ToolboxFX.
Documentation The Documentation section includes the following options. ● Product Help. Click this link to open the online version of the HP Color LaserJet CM1015 MFP/ CM1017 MFP User Guide.
How Do I? Click this link to open the How Do I? screen in the HP ToolboxFX. Software description ● Figure 2-30 How Do I? – HP Solution Center ● Onscreen Guide. Click this link to open the online help for HP Photosmart Premier.
Online Support The Online Support section contains the following links. ● Product webpage. Click this link to go to the product support Web site: www.hp.com/support/cljCM1015_CM1017 ● Contact HP. Click this link to go to the HP support Web site: www.hp.com/support Software description Create area Figure 2-32 Create area – HP Solution Center Click Create to open the Creative Projects screen.
The Creative Projects screen contains the following options. HP Photosmart Premier. Click this link to open the HP Photosmart Premier software.
● Creative Ideas. Click this link to open the HP Photosmart Premier Software Help Contents page.
Order Photo Gifts! Click this link to go to the Snapfish.com Web site, a service of HP. Software description ● Figure 2-36 Snapfish.
Clicking the links in this area opens a new software program. The following options are available. ● HP Photosmart Premier ● HP Document Viewer Idea window Software description Figure 2-38 Idea window – HP Solution Center This area displays information about how to perform a task or where to get additional training. When an active Internet connection is available, this area is an active link to specific content on the HP Web site.
HP ToolboxFX ● Overview of the HP ToolboxFX ● System requirements ● Key features ● The HP ToolboxFX folders ● Other screens Overview of the HP ToolboxFX NOTE The HP ToolboxFX is available for Microsoft Windows 2000 and Microsoft Windows XP, and Microsoft Windows XP x64 operating systems only. The HP ToolboxFX is an application that allows end users to easily communicate and manage their HP Color LaserJet CM1015 MFP/CM1017 MFP.
Structure The HP ToolboxFX consists of a single framework divided into several sections. Software description ● Heading banner. Each page that is displayed in the HP ToolboxFX has a heading banner at the top that includes the HP logo. ● Devices pane. The Devices Pane is always visible on the left-hand side of the HP ToolboxFX window. The Devices pane displays the HP products that are available to the host computer system and folders for the types of information available about each product.
Software description If the HP ToolboxFX was installed for multiple products, a product summary page appears when the program opens. The product summary page displays a brief summary of each product available to the HP ToolboxFX. Double-click any of the products listed to go to the Device Status page for that product.
Receive Alert messages for device events Use HP ToolboxFX to be alerted when certain events occur at the HP Color LaserJet CM1015 MFP/ CM1017 MFP. Receive pop-up dialogs (Status Alerts) or automatically generated e-mail messages (Email Alerts) for certain events. Alerts can also appear as a taskbar icon or as a desktop message. To see a list of the events that generate alerts in HP ToolboxFX, see the Set up Status Alerts section.
Software description Figure 2-42 HP Device Alert – CLOSE DOOR System Tray and Desktop pop-up message Desktop alert Desktop alert messages appear immediately when an error or print-cartridge warning occurs in the device. Desktop alerts only appear for a few seconds, and then automatically disappear. This feature is turned off by default. E-mail alert E-mail alert messages notify up to two users when a specific alert condition occurs in the device.
● Device Configuration ● Network Configuration ● Print Info Pages ● Event Log Device Status The Device Status screen shows device status messages from the product.
Software description Figure 2-44 Supplies Status screen Device Configuration The Device Configuration screen shows the values for all of the settings available for the product and other configuration items, such as installed DIMMs, personalities, and page counts. The contents of this screen should be consistent with the configuration page that the product generates.
Software description Figure 2-45 Device Configuration screen – 1 of 2 64 Chapter 2 Software description ENWW
Software description Figure 2-46 Device Configuration screen – 2 of 2 Network Configuration The Network Configuration screen shows the values for all of the network settings that are available for the product. The contents of this screen should be consistent with the configuration page that the product generates.
Software description Figure 2-47 Network Configuration screen Print Info Pages Use the Print Info Pages screen to print out the internal special pages that the product generates. Click Print next to the name of the page to print.
Software description Figure 2-48 Print Information Pages screen The contents of these reports are generated by the product firmware, and not by the HP ToolboxFX. Event Log Use the Event Log screen to monitor events for the HP Color LaserJet CM1015 MFP/CM1017 MFP. Up to ten events can appear on this screen. If this screen is empty, no events have occurred on the MFP.
Software description Figure 2-49 Event Log screen Alerts folder The Alerts folder contains the following sub-folders: ● Set up Status Alerts ● Set up E-mail Alerts Set up Status Alerts Use the Set up Status Alerts screen to set up status alerts on the for the HP Color LaserJet CM1015 MFP/CM1017 MFP. Select the Turn on alerts option and then click Apply to turn on alerts.
Software description Figure 2-50 Set up Status Alerts screen Select from the options under Show an alert to receive the alerts like those listed in the following table.
Table 2-1 Event alerts for HP ToolboxFX (continued) Software description Printer alerts Scan notifications E-mail alerts 70 Chapter 2 Software description ● Replace Supply Printing in Mono ● Replace Supplies Printing in Mono ● Cyan, Magenta, Yellow, or Black E-label Error ● Imaging Drum E-label Error ● Unauthorized Cyan, Magenta, Yellow, or Black Cartridge ● Unauthorized Imaging Drum ● Replace Cyan, Magenta, or Yellow Printing In Mono ● Load Paper [TYPE] [SIZE] ● High Fuser Error ●
● Insufficient memory ● Manual feed ● Non-HP print cartridge installed ● Unauthorized supply installed ● Paper out ● Printer mispick ● Remove paper jam ● Unexpected paper size Software description Table 2-1 Event alerts for HP ToolboxFX (continued) Select from the options under Show the alert to receive the alerts in one or all of three forms: ● As a pop-up message ● As a system tray icon ● As a desktop alert NOTE Click Apply to make the changes take effect.
Software description Figure 2-51 Set up E-mail Alerts screen E-mail messages can be sent when certain events occur at the product. Select the specific events for notification. To use this feature, use a valid e-mail address, select the events for notification, configure the SMTP e-mail server that will be used to send the e-mail message, and then click Apply to save the settings. Up to two e-mail addresses can be configured to receive separate e-mail messages for separate events.
Help folder The Help folder contains the following sub-folders: ● Troubleshooting ● How do I...? ● Animated Demonstrations ● User Guide Software description All of the content in the Help folder is static HTML content, except for the animated demonstrations. This content contains hyperlinks, and Next and Previous buttons, which allows users to navigate through the various sections of the Help content.
How do I...? Software description Figure 2-53 How do I...? sub-folder Click How do I... ? on the How do I... ? screen to access the How do I... ? chapter of the HP Color LaserJet CM1015 MFP/CM1017 MFP User Guide. Each of the How do I...? screens (Print, Network, Add Memory, and Other), contains set of links. Each link corresponds to a particular task. Click these links to open a new window that provides content about the given task.
Software description Animated Demonstrations Figure 2-54 Animated Demonstrations screen Click the links on the Animated Demonstrations screen to view animated demonstrations about the following topics.
User Guide Software description Figure 2-55 HP Color LaserJet CM1015 MFP/CM1017 MFP User Guide Use the User Guide screen to access the HP Color LaserJet CM1015 MFP/CM1017 MFP User Guide.
Device Information Software description Use the Device Information screen to add or change information about the HP Color LaserJet CM1015 MFP/CM1017 MFP. Figure 2-56 Device Information screen NOTE Click Apply to make the changes take effect. Paper Handling Use the Paper Handling screen to change the paper-handling defaults for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Software description Figure 2-57 Paper Handling screen Print Quality Use the Print Quality screen to change the print-quality defaults for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Software description Figure 2-58 Print Quality screen Print Density Use the settings on the Print Density page to adjust the amount toner the HP Color LaserJet CM1015 MFP/CM1017 MFP uses for images, pages, and documents.
Software description Figure 2-59 Print Density page The Print Density page contains the following settings: 80 ● Contrasts. Contrast is the density difference between light (highlight) and dark (shadow) colors. To increase the difference between light and dark colors (equivalent to a negative highlight adjustment and a positive shadow adjustment), use a positive contrast setting.
● Midtones. Midtone colors are about halfway between white and solid density. To make midtone colors darker, use a positive midtone setting, and to make midtone colors lighter use a negative highlight setting. This adjustment does not affect highlight or shadow colors. ● Shadows. Shadow colors are colors near solid density. To make shadow colors darker, use a positive shadow setting, and to make shadow colors lighter use a negative shadow setting.
Table 2-2 Standard print modes (continued) Standard print modes Extended print modes Color tables Sensor correlation prefix Default paper types Prepunched, Recycled, Letterhead Software description Heavy Mode None Plain PlainHalf Heavy, Bond Cardstock Mode None Plain PlainHalf Cardstock Light Mode None Plain PlainFull Light Light Glossy Mode None Glossy Glossy Glossy Glossy Mode None Glossy Glossy Heavy Glossy Heavy Glossy Mode None Glossy Glossy HP Premium Plus Photo Tou
The following Jam recovery settings are available: ● Auto (default) ● On ● Off ● On ● Off (default) Software description The following Auto continue settings are available: Set the Connection time-out (I/O) setting to any value from 5 to 7200 seconds. The following Fast first page out settings are available: ● On (default) ● Off Set the Cartridge low threshold setting to any value from 1 to 20%.
During the printing process, paper, toner, and dust particles accumulate inside the MFP. Over time, this buildup can cause print-quality problems such as toner specks or smearing. Click Start to run the cleaning mode procedure on the HP Color LaserJet CM1015 MFP/CM1017 MFP. Device Polling The HP ToolboxFX periodically communicates with the MFP to determine device status and enabled features.
Software description Figure 2-64 Save / Restore Settings screen Click Save, the Save as dialog box might be hidden. Look behind the browser window or on the task bar. Settings that were saved from a previous HP product cannot be restored. Only settings that were saved from an HP Color LaserJet CM1015 MFP/CM1017 MFP can be restored. NOTE The HP ToolboxFX will not function until settings have been fully loaded and the HP Color LaserJet CM1015 MFP/CM1017 MFP control panel returns to the Ready state.
Software description Figure 2-65 Password screen Network administrators can set user passwords to protect network settings. Once a password is set, only users who know the password have access to the Network Settings folder. If a password has been set, users are prompted to type the password. If the typed-in password matches the password stored in the MFP, users can navigate through the Network Settings screens and make changes to the settings.
● Network Settings pages ● Event Log page Print Settings folder ● Printing ● PCL5c ● PostScript ● Memory Card Software description The Print Settings folder contains the following screens. Printing Use the Printing screen to change the printing defaults for your HP Color LaserJet CM1015 MFP/ CM1017 MFP. Figure 2-66 Printing screen PCL5c Use the PCL5c screen to change the PCL defaults for your HP Color LaserJet CM1015 MFP/CM1017 MFP.
Software description Figure 2-67 PCL5c screen NOTE You must click Apply for your changes to take effect. PostScript Use the PostScript screen to change the Postscript defaults for your HP Color LaserJet CM1015 MFP/ CM1017 MFP.
Software description Figure 2-68 PostScript screen NOTE You must click Apply for your changes to take effect. Memory Card Use the options on the Memory Card page to configure print settings when using memory cards.
Software description Figure 2-69 Memory Card page Three options are available for configuring the MFP when using memory cards. ● Photo image size. Select the size photos to print from the drop-down list. ● Photo number of copies. Type the number of copies from 0 to 99 to print for each image. ● Photo output color. Select either Color or Monochrome from the drop-down list. Click the Enable memory cards check box to save the settings. NOTE You must click Apply for your changes to take effect.
● SNMP ● Network Summary CAUTION Changing network settings can cause communication problems between HP ToolboxFX and the product. IP Configuration Software description The IP Configuration screen shows the settings for basic TCP/IP network configuration. After changing these settings, click Apply to save the changes. Changing these settings causes the MFP to restart. Figure 2-70 IP Configuration screen The IP Configuration screen shows the host name and domain of the HP Color LaserJet CM1017 MFP.
The following DNS Address Configuration options are available: ● Automatic DNS Server. This option is selected by default. It causes the MFP to automatically obtain network addresses for DNS servers from the network. If selected, a DHCP server provides this information. ● Manual DNS Server. Select this option to manually specify network addresses for DNS servers used by the computer. If selected, type the IP address for the DNS server in Preferred DNS server field.
Option Settings Link Speed and Duplex ● Auto negotiation (default setting) ● Manual negotiation Automatic Crossover ● Link speed: 10 megabits per second (Mbps) or 100 Mbps ● Duplex: Full or Half ● Enable (default) ● Off Software description Table 2-3 Advanced Network Settings options and settings (continued) NOTE Click Apply to make the changes take effect. SNMP Use the SNMP screen to set SNMP networking features for the HP Color LaserJet CM1017 MFP.
The following options are available on the SNMP screen: ● Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the MFP. Custom community names can be configured to control management access to the HP Color LaserJet CM1017 MFP. Software description ● Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the MFP.
Software description Figure 2-73 Network Summary screen The settings appear under the following headings: ENWW ● Network Hardware Configuration ● Enabled Features ● TCP/IP HP ToolboxFX 95
● SNMP ● Network Statistics Other screens The following table lists screens that are also available through the HP ToolboxFX. Software description Screen Access About HP ToolboxFX screen Click the HP logo that appears in the upper-left corner of the HP ToolboxFX screens. HP Instant Support Click the HP Instant Support link in the Other Links box that appears on all HP ToolboxFX and HP EWS screens.
Product Support The Product Support link connects to a Web page that contains links to online support for the HP Color LaserJet CM1015 MFP/CM1017 MFP. Product Registration Software description The Product Registration link connects to a Web page for registering the HP Color LaserJet CM1015 MFP/CM1017 MFP. Figure 2-75 Product Registration screen Shop for Supplies The Shop for Supplies link connects to a Web page to order supplies online from a choice of resellers.
HP Embedded Web Server The HP Embedded Web Server (HP EWS) is a Web application that allows users to control settings on a network-connected HP Color LaserJet CM1017 MFP through the Web browser. To open the HP EWS, open the Web browser and type the MFP IP address in the address bar. NOTE If you are using an HP Color LaserJet CM1015 MFP or an HP Color LaserJet CM1017 MFP that is connected to the computer using the USB port, you do not have access to the HP EWS interface.
Software description Figure 2-76 HP EWS – Device Status page Supplies Status page The Supplies Status page displays the status of all of the supplies used by the MFP, including the black, cyan, magenta, and yellow print cartridges.
Software description Figure 2-77 HP EWS – Supplies Status page Device Configuration page The Device Configuration page displays the values of all of the settings available to be set in the MFP. The contents of this page are consistent with the Configuration page generated by the firmware.
Software description Figure 2-78 HP EWS – Device Configuration page – 1 of 3 ENWW HP Embedded Web Server 101
Software description Figure 2-79 HP EWS – Device Configuration page – 2 of 3 102 Chapter 2 Software description ENWW
Software description Figure 2-80 HP EWS – Device Configuration page – 3 of 3 Network Summary page The Network Configuration page contains all the information about the network and its enabled features.
Software description Figure 2-82 HP EWS – Network Configuration page – 2 of 2 Print Info Pages The Print Info Pages page provides users the ability to easily print out the internal special pages that are generated by the device. The following information pages are available.
Software description Figure 2-83 HP EWS – Print Info Pages page Event Log page Use the Event Log page to track the events that occur on the HP Color LaserJet CM1017 MFP.
Device Information page The Device Information page contains identifying information about the HP Color LaserJet CM1017 MFP. Software description Figure 2-85 HP EWS – Device Information page Paper Handling page Use this page to configure the paper-handling settings for the HP Color LaserJet CM1017 MFP.
Print Quality page Software description Use the Print Quality page to change the print quality defaults for the HP Color LaserJet CM1017 MFP. Figure 2-87 HP EWS – Print Quality page Print Density page Use the Print Density page to control the print density of each print cartridge on the HP Color LaserJet CM1017 MFP.
Software description Figure 2-88 HP EWS – Print Density page Paper Types page Use the Paper Types page to set the default paper type settings for the HP Color LaserJet CM1017 MFP.
Software description Figure 2-89 HP EWS – Paper Types page System Setup page Use the System Setup page to change settings on the HP Color LaserJet CM1017 MFP such as Jam Recovery and Auto Continue.
Password page Use this page to set or change the Administrator password to limit access to MFP features. Software description ● Shop for Supplies button ● Support button ● System pages ● Print pages ● Networking pages ● Event Log page Figure 2-91 HP EWS – Password page Print tab Use the Print tab to view and change print settings.
Software description Figure 2-92 HP EWS – Printing page PCL5c page Use the PCL5c page to change font information and form length. Figure 2-93 HP EWS – PCL5c page PostScript page Use the PostScript page to change the Print PS Errors option.
Software description Figure 2-94 HP EWS – PostScript page Memory Card page Use the Memory Card page to enable and control the memory card function of the HP Color LaserJet CM1017 MFP. Figure 2-95 HP EWS – Memory Card page Networking tab Use the Networking tab to view and change settings for network connection and communication.
IP Configuration page Software description Use the IP Configuration page to configure the IP address and host and domain names for the HP Color LaserJet CM1017 MFP. Figure 2-96 HP EWS – IP Configuration page Advanced page Use the Advanced page to configure the enabled settings and other settings, such as link speed, for the HP Color LaserJet CM1017 MFP.
Software description Figure 2-97 HP EWS – Advanced page Bonjour (Rendezvous) page Use the Bonjour (Rendezvous) page to enable or disable the Bonjour settings for the HP Color LaserJet CM1017 MFP. Figure 2-98 HP EWS – Bonjour (Rendezvous) page SNMP page Use this page to configure the SNMP settings for the HP Color LaserJet CM1017 MFP.
Software description NOTE Changing SNMP settings can cause the HP Color LaserJet CM1017 MFP to lose functionality for features such as scanning. Figure 2-99 HP EWS – SNMP page Network Summary page The Network Summary page contains all the information about the network and its enabled features.
Software description Figure 2-100 HP EWS – Network Summary page – 1 of 2 Figure 2-101 HP EWS – Network Summary page – 2 of 2 116 Chapter 2 Software description ENWW
Optional software ● HP Photosmart Premier. Use the HP Photosmart Premier software to manage and manipulate the digital photographs. The HP Photosmart Premier Transfer software is installed automatically with HP Photosmart Premier. Use the HP Photosmart Premier Transfer software to transfer digital photographs quickly and easily between HP devices and the computer. For more information about these programs, see the HP PhotoSmart Premier section. ● HP Document Viewer.
The following six tabs are available: ● View. This is the default screen when the program opens. Navigate to any images on the computer from the locations listed at the upper-left portion of the screen.
Edit. Select an image and click the Edit tab to open and make changes to the image.
● Print. Use the Print tab to select a print layout for the photographs and to select print settings.
Create. Click this tab to use photos and other images in creative print projects such as photo album pages, cards, CD labels, calendars, flyers, and brochures. These projects contain predefined layouts with picture holders and customizable text objects. The available projects vary depending on the HP device installed.
● Share. Select the Share tab to share photos through e-mail, online albums, and for online photofinishing through Snapfish.com, a service of HP.
Backup. Use this tab to back up digital photographs and to burn them to a CD. Software description ● Figure 2-107 Backup tab HP Marketing Assistant NOTE The HP Marketing Assistant might not be available in all countries/regions. The HP Marketing Assistant is an optional software program that is included with the HP Color LaserJet CM1015 MFP/CM1017 MFP on a separate CD. The computer must have the following system requirements to use the HP Marketing Assistant software.
Consult the HP Marketing Assistant software CD for documentation and support information. Readiris Professional V11.0 text-recognition software by IRIS Readiris Pro V11.0 converts scanned images into text that can be edited in word-processing programs. The user interface is localized into 21 languages. However, the software supports text-recognition in 123 languages. See Readiris Pro V11.0 languages for a list of languages. NOTE Readiris Pro V11.0 supports text recognition in 2-byte Asian characters.
3 Install Microsoft Windows printingsystem components Introduction NOTE This chapter covers information about the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software for Microsoft Windows. For information about Macintosh installations, see theMacintosh chapter.
Installation overview The HP Color LaserJet CM1015 MFP/CM1017 MFP software for Microsoft Windows systems comes on three CDs. The first CD includes everything needed to access the features of the HP Color LaserJet CM1015 MFP/CM1017 MFP. The second CD includes the optional software program HP Marketing Assistant, and the third CD includes the optional software program Readiris Professional V11.0 text-recognition software by IRIS.
Table 3-1 Installed software components by installation type (continued) HP ToolboxFX X HP Embedded Web Server X HP Solution Center X HP Photosmart Premier (optional) X X X HP Marketing Assistant (optional) X X X HP Document Viewer (optional) X X X Readiris Professional V11.
Installation options The HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software can be used with the HP Color LaserJet CM1015 MFP/CM1017 MFP in the following configurations: ● Direct Connection.Install the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software on a computer that is directly connected to the product through a USB port, and that is running Microsoft Windows 2000, Microsoft Windows XP, or Microsoft Windows XP x64. In this configuration, the MFP is not shared.
NOTE Administrator privileges are required to install the printing-system software. 1. Quit all open programs. 2. Insert the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software CD into the CD-ROM drive. NOTE If the CD does not start automatically, click Start, click Run, and then browse to and double-click the AUTORUN.EXE file in the root directory of the CD. 3. Follow the onscreen prompts to install the software. 4. If prompted to restart the computer, click Yes. 5.
● Network setup ● Microsoft Windows installation instructions for networked computers Network setup Set up, turn on, and connect the HP Color LaserJet CM1017 MFP to the network before installing the software. NOTE The HP Color LaserJet CM1015 MFP does not support network connections. 1. Connect the HP Color LaserJet CM1017 MFP to the network. 2. Turn on the HP Color LaserJet CM1017 MFP.
6. After installation of the software, dialog boxes appear to print a test page, register the HP Color LaserJet CM1017 MFP over the Web, and install optional software. Setting up Microsoft Windows-sharing (peer-to-peer networking) This section contains instructions for using Microsoft Windows-sharing to make the product available to network users when the product is directly connected to a computer.
4. Click the Ports tab. Click to clear the Enable bidirectional support check box, and then click OK. Setting up the client computers After setting up the host computer to share the HP Color LaserJet CM1015 MFP/CM1017 MFP, the next step is to configure the client computers. Perform the following steps at all the other network computers that will use the HP Color LaserJet CM1015 MFP/CM1017 MFP. Setting up client computers running Microsoft Windows 2000 1.
Install the print driver only NOTE If a port is not available for installation, create a port, click Have Disk, and insert the printing-system software CD that came with the product. 1. From the Start menu, click Settings, and then click Printers (Microsoft Windows 2000) or Printers and Faxes (Microsoft Windows XP, Microsoft Windows XP x64, and Microsoft Windows Server 2003). 2. Double-click Add Printer, and then click Next. 3.
Printing-system software installation This section contains information about the following topics: ● Animated Getting Started Guide ● Printing-system software installation for Microsoft Windows 2000 and Microsoft Windows XP ● Printing-system software installation for Microsoft Windows Server 2003 Animated Getting Started Guide When you insert the printing-system software CD into the CD-ROM drive, the Animated Getting Started Guide starts automatically.
Microsoft Windows install Figure 3-2 Install Software screen Printing-system software installation for Microsoft Windows 2000 and Microsoft Windows XP NOTE HP recommends that you install the software before connecting the HP Color LaserJet CM1015 MFP/CM1017 MFP to the computer (software-first installation). These instructions are for a software-first installation. Use these instructions the first time you install the HP Color LaserJet CM1015 MFP/CM1017 MFP software.
Figure 3-3 USB install – Welcome to the Install Wizard dialog box Microsoft Windows install Click Next to continue. Between dialog boxes, a Current Progress screen appears. This screen shows the progress of the installation and provides information about the number of subtasks that have been completed in each step. The screen disappears, and a new dialog box appears giving the next option in the installation sequence.
Click Next to open the Automatically check for updates dialog box. NOTE The Automatically check for updates dialog box appears only if the installer detects that a internet connection is available. Figure 3-6 USB install – Automatically check for updates dialog box If Web access is available, click Yes to check for installation updates for the HP Color LaserJet CM1015 MFP/CM1017 MFP. This step is optional.
Click the following links to open a screen that provides further information: ● Frequently Asked Questions ● HP Privacy Policy Click No and then Next to continue the installation without checking for installation updates. Microsoft Windows install Figure 3-7 USB install – Installation options dialog box Clicking Recommended causes the installer to automatically check the computer to see if it meets minimum system requirements.
Click to select the software components to be installed. The HP CLJ CM1015/CM1017 MFP Drivers check box is selected by default and is the only required component for a custom installation. Click Next to go to the License Agreement dialog box. Figure 3-9 USB install – License Agreement dialog box Click I Agree to continue the installation. The Destination Folder dialog box appears.
Figure 3-10 USB install – Destination Folder dialog box Microsoft Windows install The Destination Folder dialog box shows where the printing-system software files are installed. The default option creates an HP program group. Access the program group by clicking Start and then Programs. To change the location of the files to be installed, click the Change button and navigate to the new location, and then click OK. Click Next to go to the Ready to Install dialog box.
Click Directly to this computer using a USB cable (a "direct connection"), and then click Next. The Connect Your Device Now dialog box appears. Figure 3-13 USB install – Connect Your Device Now dialog box When the Connect to your Device Now screen appears, make sure that the HP Color LaserJet CM1015 MFP/CM1017 MFP is turned on. Then attach the USB cable to the computer and to the HP Color LaserJet CM1015 MFP/CM1017 MFP. The Next button is enabled when the USB connection is complete.
Figure 3-14 USB install – Device has been detected dialog box Microsoft Windows install The Device has been detected dialog box appears. After the progress bar fills, the Next button is enabled, the dialog box changes to show the product has been successfully connected. Figure 3-15 USB install – Device has been detected – Product connected successfully! dialog box Click Next to continue the installation. The Congratulations dialog box appears.
LaserJet CM1015 MFP/CM1017 MFP software CD is newer than the firmware on the MFP, the Auto Firmware Downloader dialog box appears. Figure 3-16 USB install – Auto Firmware Downloader dialog box WARNING! Do not touch the printer, the printer cable, or the computer during the firmware update. The firmware update process takes about 3 minutes. During this time, the MFP control panel displays several messages and then restarts the MFP.
Figure 3-17 USB install – Restart dialog box Microsoft Windows install Click Restart to restart the computer and continue with the installation. After the computer restarts, the Congratulations! Software installation complete dialog box appears. Figure 3-18 USB install – Congratulations! Software installation complete dialog box Click Finish to continue.
Figure 3-19 USB install – Test Page dialog box Microsoft Windows install The Test Page dialog box indicates that a test page is being sent to the HP Color LaserJet CM1015 MFP/CM1017 MFP. If the test page prints successfully, click OK. If the test page fails to print, click Troubleshoot to get help troubleshooting the problem. The Sign Up Now screen appears.
If Web access is available, sign up to receive information from HP by following instructions on the Sign Up Now screen. Click Next to open the HP Registration Web page. Follow the onscreen instructions to register.
The Other Options dialog box appears after the HP Color LaserJet CM1015 MFP/CM1017 MFP installation has been completed. Click Product Registration to register your product on the HP Web site. Click Connect another CM1015/CM1017 MFP to connect another HP Color LaserJet CM1015 MFP/ CM1017 MFP to the computer. Click Help to launch the online Help system. Click HP PhotoSmart Premier or HP Document Viewer to install these software packages.
NOTE The sequence of dialog boxes might differ from what is shown here, depending on the product, the network configuration, and the options that selected. Microsoft Windows install Figure 3-23 Network install — Welcome dialog box Click Next to continue. Between dialog boxes, a Current Progress screen appears. This screen shows the progress of the installation and provides information about the number of subtasks that have been completed in each step.
Figure 3-25 Network install – Do Not Block HP Install Wizard Processes dialog box NOTE The Do Not Block HP Install Wizard Processes dialog box appears regardless of whether a firewall is present. Click Next to open the Automatically check for updates dialog box. NOTE The Automatically check for updates dialog box appears only if the installer detects that an Internet connection is available.
If Web access is available, click Yes to check for installation updates for the HP Color LaserJet CM1017 MFP. This step is optional. Click the following links to open a screen that provides further information: ● Frequently Asked Questions ● HP Privacy Policy Click No and then Next to continue the installation without checking for installation updates.
Click to select the software components to be installed. The HP CLJ CM1015/CM1017 MFP Drivers check box is selected by default and is the only required component for a custom installation. Click Next to go to the License Agreement dialog box. Figure 3-29 Network install – License Agreement dialog box Click I Agree to continue the installation. The Destination Folder dialog box appears.
Figure 3-30 Network install – Destination Folder dialog box Microsoft Windows install The Destination Folder dialog box shows where the printing-system software files are installed. The default option creates an HP program group. Access the program group by clicking Start and then Programs. To change the location of the files to be installed, click the Change button and navigate to the new location, and then click OK. Click Next to go to the Ready to Install dialog box.
Select Through the Network option, and then click Next to continue the installation. The Auto Firmware Downloader feature of the HP Color LaserJet CM1015 MFP/CM1017 MFP software installer checks the device firmware at this point in the installation. If the firmware on the HP Color LaserJet CM1015 MFP/CM1017 MFP software CD is newer than the firmware on the MFP, the Auto Firmware Downloader dialog box appears. If the firmware on the MFP is already up-to-date, the Identify Printer dialog box appears.
WARNING! Do not touch the printer, the printer cable, or the computer during the firmware update. The firmware update process takes about 3 minutes. During this time, the MFP control panel displays several messages and then restarts the MFP. When the firmware update process is complete, the Continue button becomes available. Click it to go to the Identify Printer dialog box.
Microsoft Windows install Figure 3-35 Network install – Firewall Detected dialog box Click Next to continue the installation. The installer searches the network for the HP Color LaserJet CM1017 MFP, and the Searching dialog box appears. Figure 3-36 Network install – Searching dialog box If you select the Specify a printer by address option on the Identify Printer dialog box, the Specify Printer dialog box appears.
Figure 3-37 Network install – Specify Printer dialog box Microsoft Windows install Specify the HP Color LaserJet CM1017 MFP by hardware address (MAC), TCP/IP address, or IP Hostname. After typing one of these options in the appropriate field, click Next to continue. The Printer Found dialog box appears either after the system completes its search for the HP Color LaserJet CM1017 MFP, or after specifying the product.
Figure 3-39 Network install – Confirm Settings dialog box To accept the settings (recommended), click Next to continue the installation. The Congratulations! Software installation complete dialog box appears (see Figure 3-42 Network install – Congratulations! Software installation complete dialog box). To change the settings, click Change Settings. The Confirm Changing Settings dialog box appears.
Because the printer is already configured for the existing network, confirm that you want to change the settings. Click Next to continue. The Change TCP/IP Settings dialog box appears. Microsoft Windows install Figure 3-41 Network Install – Change TCP/IP Settings dialog box Make the network changes and then click Next to continue. The Confirm Settings dialog box appears (see Figure 3-39 Network install – Confirm Settings dialog box). Click Next to continue.
Click Finish to continue the installation. The Test Page dialog box appears. Microsoft Windows install Figure 3-43 Network install – Test Page dialog box Click OK to print the test page. The Sign Up Now screen appears.
If Web access is available, sign up to receive information from HP by following instructions on the Sign Up Now screen. Clicking Next opens the HP Registration web page. Follow the onscreen instructions to register.
The Other Options dialog box appears after the HP Color LaserJet CM1015 MFP/CM1017 MFP installation has been completed. Click Product Registration to register your product on the HP Web site. Click Connect another CM1015/CM1017 MFP to connect another HP Color LaserJet CM1015 MFP/ CM1017 MFP to the computer. Click Help to launch the online Help system. Click HP PhotoSmart Premier or HP Document Viewer to install these software packages.
NOTE Click Cancelon any screen in the installation sequence to stop the installation. Click Back to return to the previous screen. Microsoft Windows install Figure 3-47 Microsoft Windows Server 2003 install –Current Progress dialog box After clicking Install Software in the Animated Installation Guide, the Current Progress screen appears briefly. This screen shows the progress of the installation and provides information about the number of subtasks that have been completed in each step.
Click Directly to this computer using a USB cable (a "direct connection"), and then click Next. The Connect Your Device Now dialog box appears. When the Connect to your Device Now screen appears, make sure that the HP Color LaserJet CM1015 MFP/CM1017 MFP is turned on. Then attach the USB cable to the computer and to the HP Color LaserJet CM1015 MFP/CM1017 MFP. The Next button is enabled when the USB connection is complete. Click it to continue the installation.
The Device has been detected dialog box appears. After the progress bar fills, the Next button is enabled, the dialog box changes to show the product has been successfully connected. Microsoft Windows install Figure 3-51 Microsoft Windows Server 2003 install – Device has been detected – Product connected successfully! dialog box Click Next to continue the installation. The Test Page dialog box appears.
The Congratulations! Software installation complete dialog box appears. Microsoft Windows install Figure 3-53 Microsoft Windows Server 2003 install – Congratulations! Software installation complete dialog box Click Finish to complete the installation.
Installing optional software The HP Color LaserJet CM1015 MFP/CM1017 MFP comes with optional software to help you take full advantage of the MFP's capabilities. Install this software immediately after installing the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software, or install it at a later time by relaunching the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system CD.
● Later installation.To install more software at a later time, click Exit on the CD Browser to close the installer at the end of the installation sequence. Microsoft Windows install When ready to install more software, reinsert the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software CD into the CD-ROM drive. The Welcome Back dialog box appears, as shown in the following illustration.
HP PhotoSmart Premier Follow these steps to install the HP PhotoSmart Premier software for the HP Color LaserJet CM1015 MFP/CM1017 MFP. 1. Click HP PhotoSmart Premier on the CD Browser to launch the installer. The Welcome dialog box appears. Click Next to continue. Microsoft Windows install Figure 3-56 Welcome dialog box for HP PhotoSmart Premier 2. The Firewall warning dialog box appears. Click Next to continue.
The Check for recommended installation updates (optional) dialog box appears. Click Yesto check for updates to the software or click No to check for updates another time. Click Next to continue. Microsoft Windows install 3. Figure 3-58 Check for recommended installation updates (optional) dialog box for HP PhotoSmart Premier 4. The License Agreement dialog appears. Click I accept the terms of this license agreement and then click Next to continue the installation.
5. The Thank you dialog box appears. Click Next to continue. Figure 3-60 Thank you dialog box for HP PhotoSmart Premier Microsoft Windows install 6. The Ready to Install dialog box appears. Click Next to continue.
7. The Installing dialog box appears. Figure 3-62 Installing dialog box for HP PhotoSmart Premier When the installation is completed, the Finish dialog box appears. Click Finish to close the installer. Microsoft Windows install 8.
HP Document Viewer Follow these steps to install the HP Document Viewer software for the HP Color LaserJet CM1015 MFP/ CM1017 MFP. 1. Click HP Document Viewer on the CD Browser to launch the installer. The Welcome dialog box appears. Click Next to continue. Microsoft Windows install Figure 3-64 Welcome dialog box for HP Document Viewer 2. The Do Not Block HP Install Wizard Processes dialog box appears. Click Next to continue.
The Automatically check for updates dialog box appears. Click Yes to check for updates to the software or click No to check for updates on your own. Click Next to continue. Figure 3-66 Automatically check for updates dialog box for HP Document Viewer 4. Between dialog boxes, a Current Progress screen appears. This screen shows the progress of the installation and provides information about the number of subtasks that have been completed in each step.
5. The License Agreement dialog box appears. Click Yes to continue. Figure 3-68 License Agreement dialog box for HP Document Viewer Microsoft Windows install 6. The Thank you for buying another HP product dialog box appears. Click Next to continue.
7. The Ready to Install dialog box appears. Click Next to continue. Figure 3-70 Ready to Install dialog box for HP Document Viewer When the files have finished copying, the Finish dialog box appears. Click Finish to close the installer. Microsoft Windows install 8.
Uninstall This section provides information about the following topics: ● Uninstall component list ● Uninstall methods Uninstall component list The HP Color LaserJet CM1015 MFP/CM1017 MFP uninstaller removes the following components from your computer: Microsoft Windows install ● Drivers ● HP ToolboxFX ● User guides ● HP Solution Center (including the HP Product Assistant and the HP Software Tour) ● HP Customer Participation Program (if installed) ● HP Software Update ● HP Photosmart Prem
Uninstall methods The following three methods exist for launching the Uninstaller for the HP Color LaserJet CM1015 MFP/ CM1017 MFP. For instructions for using the Uninstaller to remove the printing-system software components, see Dialog box options for the Uninstaller. ● Program group. Click Uninstall from the HP Color LaserJet CM1015 MFP/CM1017 MFP program group fromPrograms menu on your computer. This launches the HP Color LaserJet CM1015 MFP/ CM1017 MFP Uninstaller.
3. The Uninstall – Remove programs installed with your HP device dialog box appears. Figure 3-72 Uninstall – Remove programs installed with your HP device dialog box Microsoft Windows install Clicking Uninstall all HP products associated with this device, and then clicking Next opens the Uninstall – Review uninstall instructions and information dialog box (step 5).
4. The Uninstall – Remove programs installed with your HP device dialog box appears. Microsoft Windows install Figure 3-73 Uninstall – Remove programs installed with your HP device dialog box Click to select the software components to uninstall, then click Next to continue. Clicking Select All selects all the software components at one time. Clicking Uninstall Details shows information about each software component.
5. The Uninstall – Review uninstall instructions and information dialog box appears. Figure 3-74 Uninstall – Review uninstall instructions and information dialog box Microsoft Windows install Clicking What will be removed shows the list of MFPs to be uninstalled. Clicking How to remove a single device shows instructions for uninstalling only one of the listed MFPs. Clicking Uninstall Details shows information about each software component. Click Continue to start the uninstall.
The Cleanup Progress dialog box appears. A progress bar reflects the status of the uninstall process. Figure 3-75 Cleanup Progress dialog box 7. When the uninstall process is completed, the Restart dialog box appears. Select the Click here to restart later check box if you want to restart your computer at a later time, and then click Finish. Or, click Finish to restart your computer and finish the uninstall process. Figure 3-76 Restart dialog box ENWW Uninstall 181 Microsoft Windows install 6.
Microsoft Windows install 182 Chapter 3 Install Microsoft Windows printing-system components ENWW
4 HP scanning system This section contains information about the following topics.
Scanning methods Scan from the HP Color LaserJet CM1015 MFP/CM1017 MFP by using either of the following methods. ● Open the HP Solution Center. Double-click the desktop icon or click Start, click Programs, click HP, click HP Solution Center, and then click either Scan Pictures or Scan Documents. ● From the HP Color LaserJet CM1015 MFP/CM1017 MFP control panel. On the HP Color LaserJet CM1015 MFP/CM1017 MFP control panel, press the Scan To button.
HP LaserJet Scan software This section contains the following information. ● Introduction ● Create a scan ● User interface ● E-mail ● Scan settings Introduction Use the HP LaserJet Scan software to scan from the HP Color LaserJet CM1015 MFP/CM1017 MFP and then complete any of the following tasks with the data: ● Save the scanned item to a file. ● Attach the scanned item to an e-mail. ● Perform text recognition on the scanned item.
Figure 4-1 Scanning from the Scan Picture button (Solution Center) dialog box HP scanning system 186 Chapter 4 HP scanning system ENWW
Figure 4-2 Scanning from the Scan Document button (Solution Center) ● What are you scanning? ● Where do you want to send the scanned image? ● Save Options ● Additional options ● Document preview image ● OK, Help, and Cancel What are you scanning? The options in this section are selected by default according to which Scan button you selected in the HP Solution Center. The following options are available. ● ● ENWW Document.
Where do you want to send the scanned image? The following options are available. ● ● Scan to: The following options are available from the drop-down menu. ● HP Photosmart Premier. This is the default when you select Scan Picture from the HP Solution Center. ● Photosmart Express ● Paint ● Printer ● E-mail ● Print Tab in Photosmart Premier ● Copy to clipboard ● Save to File. This is the default when you select Scan Document from the HP Solution Center.
Figure 4-3 Save Options for the Scan Picture button dialog box – HP LaserJet Scan software ● File Type. Choose the file type you want to use from the drop-down menu. This control includes a button you can use to change settings for .jpg images. ● Base File Name. Designate a base file name in the text box to which the software will append a number in sequence. This option includes a check box to allow you to overwrite existing files with the same filename. ● Save Location.
Document preview image The document preview image section contains a color, grayscale, or black and white representation of the selection you make in the What are you scanning? group box. Depending on whether you chose to scan a document or a picture, one of the following options also becomes available. ● Scan Picture Settings. Make changes to the default settings for the Scan Picture button. Figure 4-4 Scan Picture settings – HP LaserJet Scan software The following options are available.
Figure 4-5 Scan Document settings – HP LaserJet Scan software The following options are available. ● Resolution ● Automatically crop scanned documents ● Saving selected settings as a Scan Profile. ● Settings for scanning a document for editable text ● OK. Click this option to confirm selected settings. ● Help. Click here for help with scanning issues. ● Cancel. Click here to cancel the scan.
Table 4-1 Examples of supported e-mail programs Program Name Windows OS Microsoft Outlook Yes: Outlook 97, Outlook 98, Outlook 2003, Outlook XP Microsoft Outlook Express Yes Lotus Notes Yes: V5.1.0 and V6.5.4 E-mail is always sent through your default e-mail client.
Table 4-2 Available scan settings (continued) Option Scan settings File type ● Adobe PDF (*.pdf) ● Adobe PDF – searchable (*.pdf) ● JPEG (*.jpg, *.jpeg) ● Windows Bitmap (*.bmp) ● TIFF (*.tiff, *.tif) ● TIFF – compressed (*.tiff, *.tif) ● PNG Image (*.png) ● PCX Image (*.pcx) ● Flashpix (*.fpx) ● Rich text file (*.rtf) ● HTML (*.htm) ● TEXT file (*.
Scan drivers The HP Color LaserJet CM1015 MFP/CM1017 MFP software includes the following integrated scan drivers. ● TWAIN driver ● Microsoft Windows Image Acquisition (WIA) driver (Microsoft Windows XP and Microsoft Windows Server 2003 only) NOTE A network administrator must initiate the scan features. TWAIN driver The HP Color LaserJet CM1015 MFP/CM1017 MFP software includes a TWAIN driver user interface that provides great flexibility and a wide range of image-quality options.
TWAIN driver user interface Figure 4-6 TWAIN driver user interface ENWW ● New Scan. Use this control to rescan the image. Flatbed previews are always at 75 dpi and in color: ● Accept. Use this control to rescan the image if the original is on a flatbed scanner and then to send the image back to program with the specified settings. ● Resize. Use this control to change the selection area for final scan. The final scan is performed within this selection area. ● Lighten/Darken.
● Zoom. Use this control to zoom in on the selected area of the scan. This automatically starts a rescan if one is needed to obtain a clear image. ● Reset Tools. Use this option to reset all the controls to their default values. To set additional scan settings, on the Scan menu, click Scan preferences. Figure 4-7 Scan Preferences HP scanning system The Scan Preferences dialog box contains three tabs: Automatic, Quality vs. Speed, and Preview.
● Right-click on the scanner icon in the My Computer folder, and click Scanner Wizard. ● Right-click on the scanner icon in the Scanners and Cameras folder in the Control Panel, and click Scan. ● Right-click on the scanner icon in the Scanners and Cameras folder in the Control Panel, and click Scanner Wizard. WIA has its own user interface. It is relatively simple and does not contain the wide range of imagequality options that are available in the TWAIN driver user interface.
HP scanning system 198 Chapter 4 HP scanning system ENWW
5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows Introduction NOTE The HP Color LaserJet CM1015 MFP/CM1017 MFP includes two HP PCL 6 unidrivers: the HP PCL 6 Unidriver, HP PCL 6 Black and White Driver, and the PS Emulation Unidriver. This chapter includes the following information.
Access to drivers To access driver settings from within most software programs, click File, Print, and Properties. The appearance and names of the driver tabs that appear can vary, depending on the operating system. These settings apply only while the software program is open. You can also control the drivers directly from the Printers folder. These settings change the default settings used across all software programs.
Properties driver tabs The Properties driver tabs control the driver behavior and driver connections. Follow these steps to access the Properties tabs. 1. 2. Click Start, Settings, and then click one of the following: ● for Microsoft Windows 2000, click Printers. ● for Microsoft Windows XP Professional, Microsoft Windows XP Media Center, Microsoft Windows XP x64, and Microsoft Windows Server 2003, click Printers and Faxes. ● for Microsoft Windows XP Home, click Printers and Other Hardware Devices.
Help system The HP Color LaserJet CM1015 MFP/CM1017 MFP HP PCL 6 Unidriver, HP PCL 6 Black and White Driver, and PS Emulation Unidriver each include a full-featured Help system to provide assistance with printing and configuration options. The following Help options are available. ● “What's this?” Help ● Context-sensitive Help ● Constraint messages “What's this?” Help "What's this?" Help is supported in Microsoft Windows 2000, Microsoft Windows XP, and Microsoft Windows XP x64.
ENWW ● To reject the change that was just made, returning the control to its previous value, click Resolve all conflicts for me automatically and then click OK. ● To accept the change that was just made, allowing you to go back into the driver settings to resolve the conflict, click I will resolve the conflict myself and then click OK.
HP Postscript level 3 emulation support The HP Postscript level 3 emulation maintains full compatibility with Adobe PS level 3 when PS level 3 soft fonts are purchased from Adobe. Users of Adobe-licensed applications might also have the right to use the Adobe PS level 3 print drivers from Adobe with the HP LaserJet printer Postscript level 3 emulation PPD, available on the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software CD or from the HP Web site.
Advanced tab features Follow these steps to access the Advanced tab. 1. Click Start, Settings, and then click one of the following: ● for Microsoft Windows 2000, click Printers. ● for Microsoft Windows XP Professional, Microsoft Windows XP Media Center, Microsoft Windows XP x64, and Microsoft Windows Server 2003, click Printers and Faxes. ● for Microsoft Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Printing Preferences. 3. Click Advanced.
Figure 5-3 Advanced tab – HP PCL 6 Black and White Driver HP PCL 6 and PS emulation unidrivers for Microsoft Windows 206 Chapter 5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW
Figure 5-4 Advanced tab – PS Emulation Unidriver The Advanced tab contains the following controls: ● Paper/Output settings ● Graphic settings (HP PCL 6 Unidriver and PS Emulation Unidriver only) ● Document Options Paper/Output settings The Paper/Output setting contains the Copy Count settings. This driver setting is useful for software programs that do not provide a copy count. If a copy count is available in the software program, set the copy count in the software program.
or numbers greater than 9999) change to the last valid value that appeared in the box. The default number of copies is 1. Because you can set the number of copies you want from some software programs, conflicts can arise between the software program you are using and the driver. In most cases, the software program and the driver communicate, so that the number of copies set in one location (such as the program) will appear in the other (such as the driver).
● If your document uses a color that you need to match exactly, and you are sending the document to a MFP that has that specific color of ink, click Proof. ● If you want to preview the color settings from another product, click Match. TrueType Font settings (PS Emulation Unidriver only) This option specifies the TrueType font settings. The following settings are available. ● Substitute with Device Font.
● Send PostScript Error Handler ● PostScript Output Option ● TrueType Font Download Option ● PostScript Language Level ● Send PostScript Error Handler PostScript Output option The PostScript Output Option specifies the output format for PS files. Generally, you use the default setting, Optimize for Speed, to print your documents. To create a file that conforms to the Adobe Document Structuring Conventions (ADSC), click Optimize for Portability.
Print All Text as Black The Print All Text as Black feature is Disabled by default. When Enabled is selected, the driver prints all text as black regardless of the original document text color. Color text is printed as black, except for white text, which remains white. (White text is a reliable method of printing reverse typeface against a dark background.) This setting does not affect graphic images on the page, nor does it affect any text that is part of a graphic.
Paper/Quality tab features Follow these steps to access the Paper/Quality tab. 1. Click Start, Settings, and then click one of the following: ● for Microsoft Windows 2000, click Printers. ● for Microsoft Windows XP Professional, Microsoft Windows XP x64, and Microsoft Windows Server 2003, click Printers and Faxes. ● for Microsoft Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Printing Preferences. 3. Click Paper/Quality.
ENWW Paper/Quality tab features HP PCL 6 and PS emulation unidrivers for Microsoft Windows Figure 5-6 Paper/Quality tab – HP PCL 6 Black and White Driver 213
Figure 5-7 Paper/Quality tab – PS Emulation Unidriver The Paper/Quality tab contains the following controls: ● Print Task Quick Sets ● Paper Options group box ● Document preview image ● Print Quality group box (HP PCL 6 Unidriver and PS Emulation Unidriver only) Print Task Quick Sets HP PCL 6 and PS emulation unidrivers for Microsoft Windows The first group box in the upper portion of the Paper/Quality tab is Print Task Quick Sets.
Use the Print Task Quick Sets setting to store the current combination of driver settings (except the settings on the Advanced and Services tabs, where the setting is not available). Print Task Quick Sets are either preset by network-administrator settings or user-defined printing specifications (such as media size, pages per sheet, and so on). The Print Task Quick Sets setting does not appear on the driver Properties tabs.
Figure 5-8 Paper Options group box The appearance of the Paper Options group box changes when the Use Different Paper/Covers check box is selected. The following settings in the Paper Options group box are available: ● Size is: drop-down menu ● Source Is: drop-down menu ● Type is: drop-down menu ● Use Different Paper/Covers options Size is: drop-down menu The Size is: drop-down menu lists all of the supported media sizes. You can specify size for all the settings in the Paper Options group box.
Follow these steps to create a custom paper size. 1. Click Start, Settings, and then click one of the following: ● for Microsoft Windows 2000, click Printers. ● for Microsoft Windows XP, Microsoft Windows XP x64, and Microsoft Windows Server 2003, click Printers and Faxes ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Click the File menu, Server Properties, and then the Create a new form check box. 3.
Table 5-1 Standard paper types and engine speeds Paper type Engine speed Unspecified Full Plain Full Preprinted Full Letterhead Full Transparency Half speed Prepunched Full Labels Half speed Bond Half speed Recycled Full Color Full Light (60 to 70 g/m2) Full Heavy (90 to 105 g/m2) Half speed Cardstock (106 to 177 g/m2) Half speed Light Glossy (75 to 105 g/m2) Half speed Glossy (106 to 120 g/m2) Half speed Heavy Glossy (121 to 163 g/m2) Half speed Tough Paper Half speed En
● Last Page ● Back Cover To use Use Different Paper/Covers options, you must configure the setting for the print job. Each option for the Use Different Paper/Covers setting is described in the sections that follow this procedure. Use the following instructions to configure the setting. To configure the Use Different Paper/Covers options for a print job For each option, select a different tray from the Source Is: drop-down menu. For some options, the Type is: drop-down menu is also available. 1.
Figure 5-9 Front Cover setting The Front Cover and Back Cover options are as follows: ● Add a Blank or Preprinted Cover check box ● Source is: drop-down menu ● Type is: drop-down menu When you select Front Cover or Back Cover, you must also select the Add a Blank or Preprinted Cover check box to enable the setting. When you select this check box, the Source is: and Type is: drop-down menus become available and a check mark appears next to the Back Cover option.
4. Select the media type from the Type is: drop-down menu. 5. Click the Advanced tab. 6. UnderDocument Options, make sure that the Advanced Printing Features are set to Enabled. 7. Under Layout Options, make sure the Page Order option is set to Front to Back. NOTE Do not load your first-page media into the priority feed slot until you are prompted to do so by the software or by the MFP control panel. 8. Click OK, and then print your document. 9.
Document preview image The document preview image is a line-drawn image of a page that represents graphics and text. The document preview image is always oriented so that the contents of the page are right-side-up. The document preview image appears in the upper-right corner of the following Printing Preferences driver tabs: ● Paper/Quality ● Effects ● Finishing ● Color Switching between tabs does not change the location or appearance of the document preview image.
Figure 5-11 HP Digital Imaging Options dialog box The HP Digital Imaging settings should be used only on high-resolution images (600 dpi or higher) that are printed on photograph-quality paper. These settings are not recommended for text. ENWW ● Contrast Enhancement. This setting has an Automatic check box and a slide bar ranging from Off to High. Use the Contrast Enhancement setting to increase image contrast for a more visually pleasing result.
select Smoothing, the filter locates areas that contain abrupt changes in pixel value by comparison with surrounding pixels (which denotes noise) and then applies a filter to smooth the output.
Effects tab features Follow these steps to access the Effects tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Printing Preferences. 3. Click Effects.
● Watermarks group box Print Task Quick Sets Use the Print Task Quick Sets control to store the current combination of driver settings that are found on all other Printing Preferences driver tabs. Print task quick sets are either preset or user-defined printing specifications, such as paper size and pages per sheet. For more information, see Print Task Quick Sets in the Paper/Quality tab section of this guide.
Figure 5-13 Preview images - Legal on Letter; Scale to Fit off (left) and on (right) When the size for which the document is formatted (that is, the logical size) differs from the target size, the preview image uses a dashed gray line to show the boundaries of the logical page in relation to the target page size. % of Normal Size option The % of Normal Size option provides a slider bar to use for scaling the percentage setting. The default setting in the entry box is 100% of normal size.
● Finishing ● Color Switching between tabs does not change the location or appearance of the document preview image. When the cursor moves over the document preview image, the cursor changes from an arrow to a gloved hand. Toggle between portrait and landscape page orientation by clicking the image. Watermarks group box Use the Watermarks feature to select a watermark, create your own custom watermarks (text only), or edit an existing watermark.
The dialog box shows a preview image and provides options for creating a new watermark and controlling the message angle and font attributes. Click OK to accept all of the changes that are made in the Watermark Details dialog box. However, clicking Cancel does not cancel all of the changes. If you make changes to a watermark and then select a different watermark or click New, all of the changes made to the previous watermark are saved, and only the current, unsaved changes can be canceled.
Message angle Use the controls in the Message Angle group box to print the watermark in different orientations on the page; the selection of a particular setting affects only the angle of the string placement. The following settings are available: ● Diagonal. This is the default setting . Select this setting to place the text along a line that spans the lower-left to upper-right corners of the page. ● Horizontal.
Table 5-2 Watermark color values (continued) Setting Med Light Medium Med Dark Dark Very Dark Darkest Gray Red Yellow Green Cyan Blue Magenta 192 192 192 192 255 255 255 160 255 255 160 160 160 255 160 160 255 255 255 160 160 160 160 160 160 255 255 255 128 255 255 128 128 128 255 128 128 255 255 255 128 128 128 128 128 128 255 255 255 96 255 255 96 96 96 255 96 96 255 255 255 96 96 96 96 96 96 255 255 255 64 255 255 64
These values represent the intensity of the gray that is used. A choice of Light produces a lightly saturated gray watermark. A choice of Lightest produces the lightest shade of watermark; Darkest produces a black watermark. Size spin box Font sizes from 1 to 999 points are available from the Size menu. The default point size is languagedependent. The choice of Regular, Bold, Italic, and Bold Italic is available from the Style drop-down menu.
Finishing tab features Follow these steps to access the Finishing tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Printing Preferences. 3. Click Finishing.
Figure 5-16 Finishing tab – PS Emulation Unidriver The Finishing tab contains the following controls: ● Print Task Quick Sets ● Document Options ● Document preview image ● Orientation group box Print Task Quick Sets HP PCL 6 and PS emulation unidrivers for Microsoft Windows Use the Print Task Quick Sets control to store the current combination of driver settings that are found on all other Printing Preferences driver tabs.
● Booklet Layout drop-down menu ● Pages per Sheet drop-down menu ● Print Page Borders check box ● Page Order drop-down menu Print on Both Sides and Print on Both Sides (Manually) check box The Print on Both Sides (Manually) option controls the manual duplexing function of the HP Color LaserJet CM1015 MFP/CM1017 MFP. Manually printing on both sides Select the Print on Both Sides (Manually) check box to print on the second side of the media.
Follow these steps to manually print on both sides. 1. Select the Print on Both Sides (Manually) check box. 2. Click OK. The even-number pages of the document print. 3. When the Print on Both Sides Instructions dialog box appears on the computer screen, follow the directions in the dialog box to insert the stack of media (on which the even-numbered pages have been printed). The MFP control panel shows the Load Tray message for the tray from which you printed the even-numbered pages.
When Print on Both Sides is selected, the document preview image changes to show a spiral binding along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they were bound together.
Printing a book You can print a book in which the front cover, first page, other pages, last page, and back cover are printed on different media types. For more information, see the Paper/Quality tab features section of this chapter. Pages per Sheet drop-down menu Use the Pages per Sheet option to select the number of pages that you want to print on a single sheet of media.
Figure 5-18 Page-order preview images ● 2 pages per sheet ● 4 pages per sheet ● 6 pages per sheet ● 9 pages per sheet ● 16 pages per sheet Document preview image The document preview image is a line-drawn image of a page that represents graphics and text. The document preview image is always oriented so that the contents of the page are right-side-up.
Rotate by 180 degrees check box Select this feature to rotate the document image on the paper 180°. For example: If the return address on an envelope is smudged, use this setting and feed the envelope so that the return address area is fed into the MFP first. Mirror Image check box (PS Emulation Unidriver only) Click the Mirror Image check box to reverse the horizontal coordinates of the printed document.
Color tab features (HP PCL 6 Unidriver and PS Emulation Unidriver only) Follow these steps to access the Color tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Printing Preferences. 3. Click Color.
● Print Task Quick Sets ● Color options ● Print in Grayscale Print Task Quick Sets The Print Task Quick Sets control is available on each Printing Preference tab, and is used to store the current combination of driver settings found on all of the other tabs. Print Task Quick Sets are either preset or user-defined printing specifications, such as paper size and pagers per sheet. For more information, see Print Task Quick Sets in the Paper/Quality tab section of this guide.
Figure 5-20 Color Settings dialog box The Color Settings dialog box gives you independent control of the following settings: ● Text, Graphics, and Photographs settings Text, Graphics, and Photographs settings Use these sections to adjust the Neutral Grays setting for each control. Neutral Grays setting ● Black Only. This option generates neutral colors (grays and black) by using only black toner. This option guarantees that neutral colors do not have a color cast.
Edge Control Edge Control determines how edges are rendered. Edge Control consists of Adaptive Halftoning and Trapping. Adaptive Halftoning increases the edge sharpness. Trapping reduces the effect of color-plane misregistration by slightly overlapping the edges of adjacent objects. The Edge Control option contains the following settings: ● Off. The Off setting turns off Trapping and Adaptive Halftoning. ● Light. The Light setting provides minimal trapping. Adaptive Halftoning is set to On . ● Normal.
Halftone The Halftone setting controls the selection of a device-dependent halftone algorithm that is embedded in the MFP firmware. The Halftone options, Smooth and Detail, affect the resolution and clarity of your color output. ● ● Smooth. This option provides better results for large, solid-filled print areas. It also enhances photographs by smoothing out fine color gradations. Select this option for uniform and smooth area fills.
Services tab features Follow these steps to access the Services tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the printer name, and then click Printing Preferences. 3. Click Services.
ENWW Services tab features HP PCL 6 and PS emulation unidrivers for Microsoft Windows If you have Internet access, select any of these items and click Go! to open the corresponding HP Web page.
Device Settings tab features Follow these steps to access the Device Settings tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Properties. 3. Click Device Settings.
Figure 5-23 Device Settings tab - PS Emulation Unidriver The Device Settings tab contains the following controls: ● Form to Tray Assignment options ● Font Substitution Table options ● External Fonts option (HP PCL 6 Unidriver only) ● Installable Options options ● Additional Device Settings for the PS Emulation Unidriver Form to Tray Assignment A network administrator can use Form to Tray Assignment to specify the media size in each input tray.
The input trays listed in the Form to Tray Assignment setting are also listed as media sources on the Paper/Quality tab. Configuring the trays 1. Select the appropriate tray in the Form to Tray Assignment list. 2. Use the drop-down menu to select the media size (form) that is loaded in that tray. 3. Repeat steps 1 and 2 for the remaining trays. 4.
Clicking the External Fonts option causes the Properties button to appear. Clicking the Properties button opens the Font Installer dialog box. Figure 5-25 Font Installer dialog box Installing external fonts Follow these steps to install external fonts. ENWW Click Start, Settings, and then click one of the following: ● in Microsoft Windows 2000, click Printers ● in Microsoft Windows XP and Microsoft Windows XP x64, click Printers and Faxes 2. Right-click the name of the MFP, and then Properties. 3.
Removing external fonts 1. Click Start, Settings, and then click one of the following: ● in Microsoft Windows 2000, click Printers ● in Microsoft Windows XP and Microsoft Windows XP x64, click Printers and Faxes 2. Click the Device Settings tab. 3. Click the External Fonts option. The Properties button appears. 4. Click the Properties button. The Font Installer dialog box appears. 5. The external fonts that are installed appear in the Installed Fonts window.
Mopier Mode NOTE This feature requires at least 128 MB of RAM. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the MFP once. The remainder of the copies are printed at the fastest speed.
● Job Timeout ● Wait Timeout ● Minimum font size to download as outline ● Maximum font size to download as bitmap Available PostScript Memory This option specifies the amount of available PS memory. The available PS memory is a subset of the MFP's total physical memory. It is usually best to use the default setting, which is determined by your MFP manufacturer. Output Protocol This option specifies the protocol that the HP Color LaserJet CM1015 MFP/CM1017 MFP uses for print jobs.
Add Euro Currency Symbol to PostScript Fonts This option specifies whether to augment the device fonts with the euro character. The default setting is Yes. Job Timeout This option specifies how long the document can take to get from the computer to the HP Color LaserJet CM1015 MFP/CM1017 MFP before the MFP stops trying to print the document. If you specify 0 seconds, the MFP continues trying to print indefinitely. The default setting is 0 seconds.
About tab features Follow these steps to access the About tab. 1. Click Start, Settings, and then click one of the following: ● for Windows 2000, click Printers. ● for Windows XP Professional and Windows Server 2003, click Printers and Faxes. ● for Windows XP Home, click Printers and Other Hardware Devices. 2. Right-click the MFP name, and then click Properties. 3. Click About. The About tab provides detailed information about the driver.
Macintosh Macintosh 6 Introduction The HP Color LaserJet CM1015 MFP/CM1017 MFP comes with printing software and installers for Apple Computer, Inc., Macintosh operating systems. Topics: ● Macintosh printing-system software ● Macintosh install instructions ● Macintosh uninstall instructions NOTE The HP Color LaserJet CM1015 MFP/CM1017 MFP drivers send print jobs in reverse order to accommodate the face-up output bin.
Macintosh Macintosh printing-system software This section provides information about the following topics: ● Software components for Macintosh ● System requirements ● Operating-system support ● Availability Software components for Macintosh The following table outlines the software components for the HP Color LaserJet CM1015 MFP/CM1017 MFP that are available for computers running the Macintosh operating system .
The HP EWS Device Configuration utility allows you to control your MFP from your computer through the HP Embedded Web Server (HP EWS). To access the HP EWS Device Configuration utility, click Maintain Device in the HP LaserJet Director, or follow these steps: 1. Open the Finder. 2. Click Applications. 3. Double-click the HP EWS Device Configuration folder. 4. Double-click the HP Device Configuration icon. 5. Select the HP Color LaserJet CM1015 MFP/CM1017 MFP from the list.
HP Photosmart Studio for Macintosh Macintosh HP Image Zone is an easy, full-featured software application that helps you view, organize, edit, print, and share your digital photos, and use them in creative projects. Access HP Image Zone by clicking the Photo button in the HP Director, or by going to the HewlettPackard folder on your computer and double-clicking the HP Photosmart Studio icon.
Shop. Click this button to shop for HP products. ● Devices. Click this button to choose the device to work with. Macintosh ● Accessing Memory Cards through the Macintosh (HP Color LaserJet CM1017 MFP only) Follow these steps to access the memory cards on the HP Color LaserJet CM1017 MFP. 1. On the Finder menu, click Go. 2. Click Connect to Server. 3. Type smb://[IPAddress], where [IPAddress] stands for the IP address of your MFP. Click Connect. 4. The following screen appears. Click OK.
5. The following screen appears. Click OK. Macintosh Figure 6-4 Authenticate Again – Mac Memory Card Access 6. The memory card contents appear in a window on your screen and an icon is added to your desktop. NOTE The Control Panel only prints images that are in .JPG format. System requirements The HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software has the following minimum system requirements: ● Macintosh OS X (Version 10.
The following table presents the part numbers and language groups for Macintosh components on the software CD for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Macintosh Macintosh install instructions The HP Color LaserJet CM1015 MFP/CM1017 MFP comes with software and installers for Microsoft Windows and Apple Computer, Inc., Macintosh systems. Linux and UNIX systems support the HP Color LaserJet CM1015 MFP/CM1017 MFP, and software is available on the Web. This document provides procedures for installing the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system software for Macintosh operating systems.
Double-click the HP LaserJet MFP Installer icon. Macintosh 3. Figure 6-5 HP LaserJet MFP Installer icon The HP LaserJet MFP Installer folder opens. Double-click the Start Here icon for your language. Figure 6-6 Start Here icon The Animated Getting Started Guide opens. NOTE The following graphic shows the Mac OS X version 10.4 of the Animated Getting Started Guide Screen.
4. Macintosh If you have not set up your HP Color LaserJet CM1015 MFP/CM1017 MFP, click Begin Setup and follow the setup sequence to the end. The following screen appears when setup is complete. Figure 6-8 Install Software screen 5. Click Install Software. Macintosh installation instructions for direct and network connections Use the following instructions to install the software on a Macintosh computer running Mac OS X. 1.
Macintosh Installation dialog-box options for Macintosh The following sequence describes the dialog-box options that appear during the HP Color LaserJet CM1015 MFP/CM1017 MFP software installation on Macintosh systems. NOTE In the following installation sequence, the product name HP Color LaserJet CM1015 MFP/CM1017 MFP represents the specific HP MFP that you are installing. Figure 6-9 Authenticate dialog box Type your user name and password, and then click OK to continue.
Click the language list to change the language of the License Agreement and the user interface. Macintosh Click Save to save the text of the software license agreement to disk. Click Go Back to exit the installer. Figure 6-11 Installing dialog box – progress indicator The Installing dialog shows the number of items that remain to be installed.
Macintosh Figure 6-13 Restart alert Click Restart to close the installer and restart the computer. After the computer restarts, you must log in to the computer, and then the HP Setup Assistant starts automatically. NOTE If the HP Setup Assistant does not start automatically, follow these steps: 1. Click Macintosh Hard Drive. 2. Click Applications. 3. Click HP. 4. Double-click HP Setup Assistant. Figure 6-14 HP Setup Assistant – Introduction Click Next to go to the Select Device dialog box.
Macintosh Figure 6-15 HP Setup Assistant – Select Device NOTE If you have not yet connected the product to your computer, the No devices found message appears instead of a list of HP MFPs. Connect the product to the computer with the USB cable, turn on the HP Color LaserJet CM1015 MFP/CM1017 MFP, and then click Rescan USB. The HP Color LaserJet CM1015 MFP/CM1017 MFP appears in the list box. When you click USB, the HP Color LaserJet CM1015 MFP or HP Color LaserJet CM1017 MFP name appears in the list box.
Macintosh Figure 6-16 HP Setup Assistant – Firmware Upgrade Utility The Firmware Upgrade Utility appears. Click Download to upgrade to the current firmware. When the update is complete, click Quit to close the Firmware Upgrade Utility and continue the installation setup. Figure 6-17 HP Setup Assistant – Name the MFP Type a name for the MFP and click Continue.
Macintosh Figure 6-18 HP Setup Assistant – Finish The information you typed in previous dialog boxes appears in the Finish dialog box. If any items need to be changed, click the Back button to return to the dialog boxes that you need to change. Click Finish to go to the Congratulations dialog box. Figure 6-19 HP Setup Assistant – Congratulations Click Finish to close the HP Setup Assistant.
Use the following instructions to uninstall the HP Color LaserJet CM1015 MFP/CM1017 MFP software from the computer: 1. Locate the HP Color LaserJet CM1015 MFP/CM1017 MFP Uninstaller utility icon in the HP Color LaserJet CM1015 MFP/CM1017 MFP Software folder by using the following path: /Applications/hplaserjetaio/HP Uninstaller Double-click the HP Uninstaller icon to start the utility. ENWW 2.
Macintosh 274 Chapter 6 Macintosh ENWW
Engineering Details Engineering Details 7 Introduction Topics: ENWW ● Troubleshooting ● IP discovery and rediscovery ● PCL font ID list ● Media attributes ● HP Color LaserJet CM1015 MFP/CM1017 MFP Install Notes Introduction 275
Troubleshooting The following topics are described in this section: Engineering Details ● Port communication ● E-mail ● HP LaserJet Scan ● Troubleshooting tools ● Known Issues for the HP Color LaserJet CM1015 MFP/CM1017 MFP Port communication This section provides information on the following topics: ● Overview ● USB port connections ● Device conflicts in Windows Overview The HP Color LaserJet CM1015 MFP includes a USB port.
Opening the Windows Device Manager Follow these steps to open the Windows Device Manager. 1. In Microsoft Windows 2000, click Start, click Settings, and then click Control Panel. 2. Double-click the System icon. 3. On the Hardware tab, click Device Manager. Check for device conflicts Follow these steps to check for device conflicts. 1. Look for devices that appear on the list with a yellow exclamation mark (!) or a red X . 2.
Installed Devices Engineering Details Figure 7-1 Sample Device Manager window Click the View menu to see further options: ● Devices by Type ● Devices by Connection ● Resources by Type ● Resources by connection ● Hidden Devices The following table shows devices that are installed by the HP Color LaserJet CM1015 MFP/CM1017 MFP software in Microsoft Windows 2000 and Microsoft Windows XP.
Device by type Device Disk drives ● HP Color LaserJet CM1015 MFP/CM1017 MFP USB Device IEEE 1284.4 compatible printers (Microsoft Windows XP) ● HP Color LaserJet CM1015 MFP/CM1017 MFP IEEE 1284.
File to E-mail utility The File to E-mail utility collects the data specified in an .INI file and then attaches the data files to an e-mail that can be sent to HP Customer Support to assist troubleshooting. The utility runs on your computer, but does not interact with your HP Color LaserJet CM1015 MFP/CM1017 MFP. The tool is included on the installer CD, but is not copied to your computer during the software installation.
FixErr1714 utility ● This utility might fix the 1714 problem; some evidence exists that this utility might not work in all cases. ● No command line options exist, just double-click. ● No logging takes place. ● No user interface exists. Known Issues for the HP Color LaserJet CM1015 MFP/CM1017 MFP The following issues are known issues for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Device Communication The majority of problems observed with HP ToolboxFX involve a lack of communication with the device. In these cases, you should always check to see if the cables are plugged in, and the device is turned on. Also, please see the above section regarding .NET Framework dependencies. If communication problems are observed, particularly over a USB connection, the .NET Framework and Windows configuration should be checked and updated if necessary.
Solution: Open HP Marketing Assistant from the desktop icon or Start>All Programs>HP>HP Marketing Assistant and then click Start HP Marketing Assistant. ● Issue: HP Solution Center might not show second MFP when two HP Color LaserJet CM1015 MFP/CM1017 MFPs are installed on the same system. Solution: Both MFPs are accessible through HP ToolboxFX.
Hardware/Firmware ● Cause: CPR occurs when several color planes are misaligned. For example, if green text is printed, green is the combination of cyan and yellow toner. When the two color planes, cyan and yellow, are slightly misaligned it looks as if the print is fuzzy or ghosted. Solution: Verify media type is set to represent correct media used. This is particularly important with envelopes, and small and thick media.
● Cause: Supplies Status values for cartridges that have reached the out state are no longer valid when “Override out” is in use. Solution: Do not enable “Override out”. Override out can only be enabled from the MFP control panel (System Setup>Print Quality>Replace Supplies>Override out). ● Cause: This could only occur if two yellow or two magenta cartridges were installed in the MFP and one of them were installed in the cyan slot.
IP discovery and rediscovery This document discusses the features that function correctly and those that don't through the IP discovery and rediscovery process for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
ScanTo application NOTE The ScanFixIt utility that shipped on the HP Color LaserJet CM1015 MFP/CM1017 MFP printing-system CD will NOT update this value.
PCL font ID list The following table lists the PCL font IDs for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
ENWW Arial Bd 30 37 Arial It 31 36 Arial BdIt 32 38 Arial It 31 36 Arial BdIt 32 38 TimesNewRmn 33 39 TimesNewRmn Bd 34 41 TimesNewRmn IT 35 40 TimesNewRmn Bdlt 36 42 Helvetica 37 57 Helvetica Bd 38 59 Helvetica Ob 39 58 Helvetica BdOb 40 60 Helvetica Nr 41 61 Helvetica NrBd 42 63 Helvetica NrOb 43 62 Helvetica NrBdOb 44 64 Palatino Rmn 45 69 Palatino Bd 46 71 Palatino It 47 70 Palatino BdIt 48 72 ITCAvantGard Bk 49 45 ITCAvantGard Db 50 4
Table 7-2 PCL font ID list (continued) Engineering Details Times It 63 75 Times BdIt 64 77 ZapfChancery MdIt 65 78 Symbol 66 43 SymbolPS 67 73 WingDings 68 44 ZapfDingbats 69 79 Courier Bd 70 25 Courier It 71 24 Courier BdIt 72 26 LetterGothic 73 27 LetterGothic Bd 74 28 LetterGothic It 75 29 CourierPS 76 53 CourierPS Bd 77 55 CourierPS Ob 78 54 CourierPS BdOb 79 56 Line Printer 80 84 Line Printer 81 84 Line Printer 82 84 Line Printer 83 84 Li
Media attributes This section includes the following information about media attributes: ● Media types and sizes ● Custom paper sizes The tables in this section provide information about media features, media attributes, and paperhandling constraints for the HP Color LaserJet CM1015 MFP/CM1017 MFP. NOTE The following table lists the features and attributes of various media listed under the Size Is drop-down menu on the Paper/Quality tab. The list order can vary, depending on the operating system.
Table 7-3 Supported media attributes (continued) Paper sizes B5 (JIS) Engineering Details Postcard (JIS) Double Postcard (JIS) A5 8.5 x 13 (Foolscap) 16K 7.75 x 10.75 16K 184x260mm 16K 195x270mm 292 Chapter 7 Engineering Details Width Height (3.0 inches) (5.00 inches) Maximum: Maximum: 216 mm 356 mm (8.5 inches) (14.0 inches) 182 mm 257 mm (7.16 inches) (10.12 inches) 100 mm 148 mm (3.94 inches) (5.83 inches) 148 mm 200 mm (5.83 inches) (7.87 inches) 148 mm 210 mm (5.
Custom paper sizes The following table identifies the media types the HP Color LaserJet CM1015 MFP/CM1017 MFP supports in trays 1, 2, and 3. Media Type Dimensions1 Weight Capacity2 Paper Minimum: 76 x 127 mm (3 x 5 inches) 60 to 163 g/m2 (16 to 43 lb) Tray 1: Single sheet of paper Up to 176 g/m2 (47 lb) for postcards Tray 2: Up to 250 sheets Maximum: 216 x 356 mm (8.5 x 14 inches) Optional tray 3: Up to 250 sheets NOTE Tray 3 does not accept postcards, envelopes, or other special media.
HP Color LaserJet CM1015 MFP/CM1017 MFP Install Notes Engineering Details ● I. Introduction ● II. LATE-BREAKING INFORMATION ● III. INSTALLATION INSTRUCTIONS ● IV. TECHNICAL ASSISTANCE ● V. LEGAL STATEMENTS I. Introduction PURPOSE OF THIS DOCUMENT This document provides specific installation instructions and other information you should know before you install and use the printing system.
● Full-color copying from letter/A4-sized scanner glass ● 1200-ppi 24-bit full-color scanning from letter/A4-size scanner glass HP Color LaserJet CM1017 ● Four memory-card slots ● Tilt-screen graphical display ● Built-in internal print server for connecting to a 10/100Base-T network This file provides specific installation, compatibility, and troubleshooting information.
● HP Product Assistant ● HP Solution Center End-user software components available for a Custom install Drivers A driver is software that allows software applications to access device features. Typically, you should install drivers for each device.
HP ToolboxFX The printing system software includes HP ToolboxFX software for end-users. HP ToolboxFX provides device status information such as toner and paper levels, and it also provides pop-up alert messages when attention is needed at the device. HP ToolboxFX is also used to configure the device settings. Adobe Acrobat Reader Use Acrobat Reader to view the online manuals. A version is available on the CD-ROM in the following location: Engineering Details :\apps\Adobe\Acrobat5.
General Engineering Details ● The SNMP Community Name can be set in HP ToolboxFX or the embedded Web server. If the Community Name is changed to something other than "public", network scanning stops working. ● Firewall software can interfere with the HP software installer. Disable the firewall before starting a network installation or the device might not be detected. ● Certain high-speed USB 2.0 cards ship with unsigned host controller drivers. If you have purchased a USB 2.
● Scanning at higher resolutions can take a long time, and the process will create large files. The best compromise between quality, time, and size is provided by the default resolution. ● The default file type for the HP LaserJet Scan software is JPEG when scanning to a file, and the default file type is PDF when scanning to e-mail. A JPEG file supports 256 gray shades (8-bit) output type. If you select an output type of black-and-white (1-bit), the file produced will still be in the JPEG format.
INSTALLING SOFTWARE ON WINDOWS 2000, XP, AND SERVER 2003 NOTE Administrator privileges are required to install the printing system. NOTE Do not plug the USB cable into the computer or printer until instructed to do so by the software. Engineering Details 1. Quit all programs. 2. Insert the CD-ROM. 3. If the HP printing system installer program has not started after 30 seconds, complete steps 4 through 6. 4. Select Run from the Start menu on your taskbar. 5.
TRADEMARK NOTICES Adobe®, Acrobat®, and Adobe® PostScript® 3™ are trademarks of Adobe Systems Incorporated. Energy Star® and the Energy Star mark® are US registered marks of the United States Environmental Protection Agency. Microsoft®, Windows®, and Windows® XP are U.S. registered trademarks of Microsoft Corp. UNIX® is a registered trademark of the Open Group. Warranty See the device user guide for complete warranty and support information.
Engineering Details 302 Chapter 7 Engineering Details ENWW
Index Symbols/Numerics % of Normal Size setting unidrivers 227 A About tab HP ToolboxFX 96 unidrivers 256 AccessDeniedUtility.
(Microsoft Windows Server 2003 installation) 163 Connect Your Device Now dialog box (USB Windows installation) 141 Connection time-out (I/O) settings 83 Connection Type dialog box (Microsoft Windows Server 2003 installation) 162 Connection Type dialog box (USB Windows installation) 141 Connection Type dialog box (Windows network installation) 153 connection types installation options, Windows 128 constraint messages unidrivers 202 Control area, HP Solution Center 30 copies, number of unidriver settings 207
HP Software License Agreement 139 Installation options 138 Other options 147 Ready to Install 140 Restart 144 Sign Up Now 145 Test Page 145 Welcome 136 Welcome Back 167 DIMMs, included 4 direct connections features available 7, 8 Macintosh installation 266 Windows installation 128 Director, HP LaserJet 258, 259 directory structure, software CDROM Windows 17 disk space requirements Macintosh 262 Windows 11 Do Not Block HP Install Wizard Processes dialog box (Windows network installation) 149 Do Not Block HP
multitasking 8 product 4 File to E-mail utility 280 Finishing tab unidrivers 209, 233 Firewall Detected dialog box (Windows network installation) 155 firewalls network Windows installation 149 USB Windows installation 137 firmware upgrades 143, 153 First Page paper settings, unidrivers 221 FixErr1714 utility 281 Flip Pages Up settings PCL 6 unidriver 236 fonts Euro symbol 255 External, PCL 6 unidriver 250 HP Postscript level 3 emulation support 204 included 5 installation components, Windows 126 lists, prin
uninstalling 176 View tab 118 HP PhotoSmart Studio (Macintosh) 258, 260 HP Postscript level 3 emulation support 204 HP Product Assistant 10 HP Software License Agreement dialog box Macintosh installation 267 network Windows installation 151 USB Windows installation 139 HP Software Tour 10 HP Software Update 10 HP Solution Center Control area 30 Create area 52 features 29 Help and Support area 46 Idea window 56 installation components, Windows 127 opening 29 operating systems supported 15 Order HP Prints Onl
installers included 14 Macintosh 258 Instant Support, HP 96 IP Configuration page, HP EWS 113 IP Configuration settings 91 IPX/SPX protocols 128 Itanium Architecture (IA-64) 12 J jams recovery settings 83 Job Timeout, PS Emulation Unidriver 255 K known issues 281 L landscape orientation Flip Pages Up, PCL 6 unidriver 236 unidrivers 239 languages, localized versions CD-ROMs, Windows 17 documentation 23 Macintosh software 263 ordering CDs 16 LaserJet Scan software about 185 dialog boxes 185 e-mail 191 scannin
HP Embedded Web Server settings 112 HP ToolboxFX settings 65 installation dialog boxes, Windows 147 installation options, Windows 128 IP Configuration settings 91 Password settings 85 peer-to-peer, setting up 131 settings 41 settings summary 94 SNMP settings 93 Windows software installation 129 Neutral Grays settings, unidrivers 243 number of copies unidriver settings 207 O O/S2 support 12 OCR accuracy 124 installation components, Windows 127 languages supported 21 Macintosh 258 operating systems supported
Paper Options 215 Paper/Output settings 207 Paper/Quality tab 212 Print All Text as Black 211 Print on Both Sides 235 Print Optimizations option 209 Print Quality group box 222 Print Task Quick Sets 214 Printer Features tab 210 Printing Preferences tab 200 Properties tab 201 Raster Compression 211 Resizing Options 226 Send TrueType as Bitmap 211 Services tab 246 settings, changing 200 TrueType font settings 209 Watermarks settings 228 PCL5c page, HP EWS 111 PCL5c screen, HP ToolboxFX 87 PDF files, online he
Output Protocol 254 Page Order 211 Paper Options 215 Paper/Output settings 207 Paper/Quality tab 212 PostScript Options 209 Print All Text as Black 211 Print on Both Sides 235 Print Quality group box 222 Print Task Quick Sets 214 Printer Features tab 210 Printing Preferences tab 200 Properties tab 201 Resizing Options 226 Services tab 246 settings, changing 200 timeout settings 255 TrueType font settings 209 Watermarks settings 228 Q quality settings HPToolboxFX 78 unidrivers 222 quick sets unidrivers 214 R
Software area, HP Solution Center 55 software license agreement Macintosh installation 267 network Windows installation 151 USB Windows installation 139 Software Tour 10 Software Update 10 software, ordering 16, 263 Solution Center Control area 30 Create area 52 features 29 Help and Support area 46 Idea window 56 installation components, Windows 127 opening 29 Order HP Prints Online 46 Product Information area 30 Scan document area 31 Scan picture area 30 Settings 34 Shopping Center 43 Software area 55 Supp
supported 291 unidriver settings 217 U unidrivers About tab 256 Add Printer Wizard installation 129 Advanced Printing Features, enabling 209 Advanced tab 205 booklet printing 237 Color tab 241 constraint messages 202 Copy Count 207 Device Settings tab 248 Document Options 209, 234 document preview image 222 Effects tab 225 Finishing tab 233 font substitution table 250 Form to Tray Assignment 249 Graphic settings 208 help 202 HP Digital Imaging 222 Image Color Management (ICM) 208 Installable Options 252 ins
314 Index ENWW
© 2006 Hewlett-Packard Development Company, L.P. www.hp.
