User Guide

●
Midtones. Midtone colors are about halfway between white and solid density. To make midtone
colors darker, use a positive midtone setting, and to make midtone colors lighter use a negative
highlight setting. This adjustment does not affect highlight or shadow colors.
●
Shadows. Shadow colors are colors near solid density. To make shadow colors darker, use a
positive shadow setting, and to make shadow colors lighter use a negative shadow setting. This
adjustment does not affect highlight or midtone colors.
Paper Types
Use the Paper Types screen to configure the standard print modes that correspond to the various paper
types.
Figure 2-60 Paper Types screen
A print mode is a special setting that controls the print speed and the fuser temperature of the MFP. The
product speed and fuser temperature are adjusted to match the print mode that selected, which can
result in better print quality when printing on certain media types.
NOTE Not all of the paper types listed in the driver can be adjusted from the Paper Types
screen.
The following table shows the paper types that the HP Color LaserJet CM1015 MFP/CM1017 MFP
supports and the default fuser mode for each type.
Table 2-2 Standard print modes
Standard print modes Extended print modes Color tables Sensor correlation
prefix
Default paper
types
Normal Mode None Plain PlainFull Plain, Color,
Preprinted,
ENWW HP ToolboxFX 81
Software description