User Guide

Figure 2-65 Password screen
Network administrators can set user passwords to protect network settings. Once a password is set,
only users who know the password have access to the Network Settings folder. If a password has
been set, users are prompted to type the password. If the typed-in password matches the password
stored in the MFP, users can navigate through the Network Settings screens and make changes to
the settings. Users who do not type the correct password within three attempts are not allowed access
to the Network Settings screens.
If the password is lost or forgotten, the factory settings for the HP Color LaserJet CM1015 MFP/CM1017
MFP must be restored and a new password must be assigned.
Follow these steps to restore the factory settings for the HP Color LaserJet CM1015 MFP/CM1017 MFP.
1. Turn off the HP Color LaserJet CM1015 MFP/CM1017 MFP.
2. Lightly press the right arrow key and the cancel button simultaneously.
3. Holding these two buttons down, turn on the HP Color LaserJet CM1015 MFP/CM1017 MFP.
NOTE Click Apply to make the changes take effect.
The following HP ToolboxFX features become locked when a password is set.
●
Shop for Supplies button
●
Support button
●
System Settings pages
●
Print Settings pages
86 Chapter 2 Software description ENWW
Software description