User Guide

Figure 2-69 Memory Card page
Three options are available for configuring the MFP when using memory cards.
●
Photo image size. Select the size photos to print from the drop-down list.
●
Photo number of copies. Type the number of copies from 0 to 99 to print for each image.
●
Photo output color. Select either Color or Monochrome from the drop-down list.
Click the Enable memory cards check box to save the settings.
NOTE You must click Apply for your changes to take effect.
Network Settings folder
The HP Color LaserJet CM1017 MFP includes onboard networking support. This model does not
support the use of external Jetdirect boxes for network connectivity. Use the Network Settings options
to configure the network settings for the HP Color LaserJet CM1017 MFP.
For network installations, the HP ToolboxFX communicates with the HP Color LaserJet CM1017 MFP
by using the network settings that appear on the following Network Settings sub-folder screens:
●
IP Configuration
●
Advanced
90 Chapter 2 Software description ENWW
Software description