User Guide

●
SNMP
●
Network Summary
CAUTION Changing network settings can cause communication problems between
HP ToolboxFX and the product.
IP Configuration
The IP Configuration screen shows the settings for basic TCP/IP network configuration. After changing
these settings, click Apply to save the changes. Changing these settings causes the MFP to restart.
Figure 2-70 IP Configuration screen
The IP Configuration screen shows the host name and domain of the HP Color LaserJet CM1017 MFP.
By default, the HP Color LaserJet CM1017 MFP uses automatic IP configuration and DNS Server. Use
this screen to configure the TCP/IP address and DNS Server manually.
The following IP Address Configuration options are available:
●
Automatic IP. This option is selected by default. It causes the MFP to obtain a TCP/IP address
from a Dynamic Host Configuration Protocol (DHCP) server, BOOTP server, or AUTOIP.
●
Manual IP. Select Manual IP to manually specify an Internet Protocol (IP) address (also known as
a static IP address). Selecting this option requires an IP address in the IP address, Subnet
mask, and Default gateway fields.
ENWW HP ToolboxFX 91
Software description