User Guide

The following DNS Address Configuration options are available:
●
Automatic DNS Server. This option is selected by default. It causes the MFP to automatically
obtain network addresses for DNS servers from the network. If selected, a DHCP server provides
this information.
●
Manual DNS Server. Select this option to manually specify network addresses for DNS servers
used by the computer. If selected, type the IP address for the DNS server in Preferred DNS
server field.
In the Alternate DNS server field, specify the IP address for the alternate or secondary DNS server
for this computer. This server is used if the DNS server specified in Preferred DNS server is
unavailable.
NOTE Click Apply to make the changes take effect.
Advanced
Use the Advanced screen to set advanced networking features for the HP Color LaserJet CM1017
MFP.
Figure 2-71 Advanced Network Settings screen
The following table shows the options and settings that are available for the Advanced screen.
Table 2-3 Advanced Network Settings options and settings
Option Settings
Enabled Features
●
LPD Printing (enabled by default)
●
HP SLP Discovery (enabled by default)
92 Chapter 2 Software description ENWW
Software description