User Guide

The following options are available on the SNMP screen:
●
Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the MFP.
Custom community names can be configured to control management access to the HP Color
LaserJet CM1017 MFP.
●
Set Community name: Type the SNMP Set Community Name (password) to allow SNMP
information to be configured (or written) on the MFP.
●
Confirm Set Community name: Retype the SNMP Set Community Name (password) to
allow SNMP information to be configured (or written) on the MFP.
●
Get Community name: Type the SNMP Get Community Name (password) to allow SNMP
information to be read from the MFP.
●
Confirm Get Community name: Retype the SNMP Get Community Name (password) to
allow SNMP information to be read from the MFP.
●
Disable SNMP v1 default Get Community name of “public”. Select this option to disable
the default Get community name "public". If selected, type values in the Get Community
name and Confirm Get Community name fields.
●
Enable SNMP v1 read-only access (uses “public” for the Get Community value). Select this
option to enable the SNMP V1 agents on the HP Color LaserJet CM1017 MFP, but limit access to
read-only. Write-access is disabled. The default Get Community name "public" is automatically
enabled.
●
Disable SNMP v1. Select this option to disable the SNMP V1 agents on the HP Color
LaserJet CM1017 MFP, which is recommended for secure environments. If SNMP V1 is disabled,
some port monitors or discovery utilities might not operate properly.
NOTE Click Apply to make the changes take effect.
NOTE Disabling SNMP can cause the HP Color LaserJet CM1017 MFP to lose functionality for
features such as scanning.
Network Summary
The Network Summary screen provides an overview of the network settings that have been enabled
for the HP Color LaserJet CM1017 MFP.
94 Chapter 2 Software description ENWW
Software description