User Guide

HP LaserJet Scan software
This section contains the following information.
●
Introduction
●
Create a scan
●
User interface
●
E-mail
●
Scan settings
Introduction
Use the HP LaserJet Scan software to scan from the HP Color LaserJet CM1015 MFP/CM1017 MFP
and then complete any of the following tasks with the data:
●
Save the scanned item to a file.
●
Attach the scanned item to an e-mail.
●
Perform text recognition on the scanned item.
●
Open the scanned item with any third-party software program that supports the drag-and-drop
function.
Create a scan
Follow these steps to create a scan with the HP LaserJet Scan software.
1. Click Start, Programs , HP, HP Color LaserJet CM1015 MFP/CM1017 MFP, and then click
HP Solution Center.
2. Click Scan Picture or Scan Document.
3. Make any changes to settings that you want. If you want to see a preview of your scan, leave
theShow Preview check box selected. After you have made your changes, click Scan.
4. If you clicked to clear the Show Preview check box, go to step 5.
If you left the Show Preview check box selected. the hp scanning dialog box appears. You have
the option of making additional changes to the scan here. When you have finished making changes,
click Accept Scan.
5. The HP LaserJet Scan software scans your item and sends it to the destination you selected in
step 3.
User interface
The HP LaserJet Scanning software contains the following dialog boxes, which can all be accessed by
clicking the Scan Picture or the Scan Document buttons in HP Solution Center.
Scan Picture or Scan Document
When you click Scan Picture or Scan Documentin the HP Solution Center, the Scanning from the
Scan [Picture or Document] button (Solution Center) dialog box appears.
ENWW HP LaserJet Scan software 185
HP scanning system