User Guide

Figure 5-4 Advanced tab – PS Emulation Unidriver
The Advanced tab contains the following controls:
●
Paper/Output settings
●
Graphic settings (HP PCL 6 Unidriver and PS Emulation Unidriver only)
●
Document Options
Paper/Output settings
The Paper/Output setting contains the Copy Count settings.
Copy Count setting
This driver setting is useful for software programs that do not provide a copy count. If a copy count is
available in the software program, set the copy count in the software program. Copy Count specifies
the number of copies to print.
The number of copies that you request appears in the Copy Count option. You can select the number
by typing in the box or by using the up and down arrows on the right side of the text box. For the HP Color
LaserJet CM1015 MFP/CM1017 MFP, valid entries are numbers from 1 to 9999. The copies value will
not advance from the maximum number (9999) to 1 when the up arrow is used, or change from 1 to the
maximum number (9999) when the down arrow is used. When you click another group box or leave
the Advanced tab, invalid entries into the edit box (such as non-numerical input, numbers less than 1,
ENWW Advanced tab features 207
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows