User Guide

Use the Print Task Quick Sets setting to store the current combination of driver settings (except the
settings on the Advanced and Services tabs, where the setting is not available). Print Task Quick
Sets are either preset by network-administrator settings or user-defined printing specifications (such as
media size, pages per sheet, and so on). The Print Task Quick Sets setting does not appear on the
driver Properties tabs.
The following selections are available in the Print Task Quick Sets drop-down menu:
●
Default Print Settings
●
User Guide Print Settings
●
Type a new Quick Set name here
Default Print Settings
When you select Default Print Settings, nearly all of the settings are restored to the combination that
existed after the driver was installed (the original settings). However, if the attribute combinations that
are associated with watermark definitions, custom paper sizes, or the User Guide Print Settings quick
set have been changed or deleted, the original settings are not restored.
Type a new Quick Set name here appears in the Print Task Quick Sets menu automatically if no
other driver settings have been changed since the driver was installed, or if all of the driver settings
match the original settings. Otherwise, the setting in the Print Task Quick Sets menu is the same label
that appeared when you last closed the printing Properties dialog box by clicking OK.
User Guide Print Settings
The User Guide Print Settings option provides a Print Task Quick Sets for optimal printing of the
HP Color LaserJet CM1015 MFP/CM1017 MFP User Guide.
Type new Quick Set name here
By default, the Print Task Quick Sets menu is set to Type new Quick Set name here. When you
change any of the default settings on any of the Printing Preferences driver tabs and you want to save
the configuration as a Print Task Quick Set, highlight the words Type new Quick Set name here, type
the name you want for your new Print Task Quick Set, and then click Save. Print Task Quick Sets are
saved in the system registry. To delete a Print Task Quick Set, select it from the drop-down menu and
click Delete.
NOTE Administrators can predefine Print Task Quick Sets for their users. These administrator
Print Task Quick Sets are defined on the server and are available to users, but usually cannot
be modified by users. Users can also define Print Task Quick Sets for their own use. User-defined
Print Task Quick Sets are described later in this section.
You can store a maximum of 25 Print Task Quick Sets on a particular system. If you attempt to save
too many, a message box appears that reads, "There are too many Print Task Quick Sets defined.
Please delete some before adding new ones."
Paper Options group box
The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the
pages of the document. The following figure shows the Paper Options group box and the selections
available by default.
ENWW Paper/Quality tab features 215
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows