User Guide

●
Last Page
●
Back Cover
To use Use Different Paper/Covers options, you must configure the setting for the print job. Each option
for the Use Different Paper/Covers setting is described in the sections that follow this procedure. Use
the following instructions to configure the setting.
To configure the Use Different Paper/Covers options for a print job
For each option, select a different tray from the Source Is: drop-down menu. For some options, the
Type is: drop-down menu is also available.
1. To use different paper or cover stock, select the Use Different Paper/Covers check box. A list of
options appears in the dialog box. The full set of selections is visible when you use the down arrow
button to the right of the list to scroll.
2. To use different media for the pages within the print job, select the appropriate option (Front
Cover, First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark
appears to the left of the option when you change a setting in the Source is: or Type is: drop-
down menus.
3. Click OK to print.
NOTE Use the same size of media for the entire print job. All options that you select from the
available Use Different Paper/Covers options use the size selected in the First Page settings.
When you change the type and source of the paper and covers, the settings remain configured
until you close the application software.
Each option for the Use Different Paper/Covers setting is described in the following sections, in the
order they appear in the pane below the Use Different Paper/Covers check box.
Front Cover and Back Cover options
Use these options to include a blank or preprinted front cover or back cover on a document.
The following figure shows the Front Cover setting and options. These options are the same for the
Back Cover setting.
ENWW Paper/Quality tab features 219
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows