User Guide

●
Print Task Quick Sets
●
Color options
●
Print in Grayscale
Print Task Quick Sets
The Print Task Quick Sets control is available on each Printing Preference tab, and is used to store
the current combination of driver settings found on all of the other tabs. Print Task Quick Sets are either
preset or user-defined printing specifications, such as paper size and pagers per sheet. For more
information, see
Print Task Quick Sets in the Paper/Quality tab section of this guide.
Color options
Use the Color Options group box to adjust the independent color controls. The settings affect the print
job color rendering and print quality. The Color Options group box contains the following controls:
●
Automatic color settings
●
Manual color settings
Automatic color settings
Use the Automatic option for default coloration settings that automatically fine-tune your color MFP
output. The HP Automatic default color settings provide high-quality output for most color printing
needs.
Manual color settings
To change the default coloration settings, select the Manual option, and then click the Settings button.
The Color Settings dialog box appears.
To change the settings, make your selections from the drop-down menus in the Color Settings dialog
box, and then click OK. The following figure shows the Color Settings dialog box:
242 Chapter 5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows