User Guide

Figure 5-20 Color Settings dialog box

The Color Settings dialog box gives you independent control of the following settings:

●

Text, Graphics, and Photographs settings

Use these sections to adjust the Neutral Grays setting for each control.

Neutral Grays setting

The Neutral Grays drop-down menu controls the selection of a device-dependent color table that is

embedded in the MFP firmware. The options are Black Only or 4-Color. You can adjust the Neutral

Grays setting independently for Text, Graphics, or Photographs.

●

Black Only. This option generates neutral colors (grays and black) by using only black toner. This

option guarantees that neutral colors do not have a color cast. Black Only is the default setting for

the Text and Graphics components.

●

4-Color. This option generates neutral colors by combining all four colors of toner, which produces

smoother gradients and transitions to non-neutral colors. It also produces the darkest possible

black. The default setting for Photographs is 4-Color.

General

Use the General setting group to control the Edge Control, RGB Color, and Halftone settings for all

color printing.

ENWW Color tab features (HP PCL 6 Unidriver and PS Emulation Unidriver only) 243

HP PCL 6 and PS

emulation unidrivers for

Microsoft Windows