User Guide

Figure 5-23 Device Settings tab - PS Emulation Unidriver
The Device Settings tab contains the following controls:
●
Form to Tray Assignment options
●
Font Substitution Table options
●
External Fonts option (HP PCL 6 Unidriver only)
●
Installable Options options
●
Additional Device Settings for the PS Emulation Unidriver
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the media size in each input tray.
The HP Color LaserJet CM1015 MFP/CM1017 MFP supports more than one source of media. You can
assign a form (which defines the media size and margins) to each of your MFP media sources. When
a form is matched to a source, you can select the form when you print. The MFP prints from the tray to
which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
media size that is loaded into each available input tray. The use of forms constrains the choices that
are available in the media-size list on the Advanced tab in the Printing Preferences driver tab set.
This constraint prevents (or reduces the likelihood of) tying up the MFP with paper-mount messages
that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional accessory
trays.
ENWW Device Settings tab features 249
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows