User Guide

Removing external fonts
1. Click Start, Settings, and then click one of the following:
●
in Microsoft Windows 2000, click Printers
●
in Microsoft Windows XP and Microsoft Windows XP x64, click Printers and Faxes
2. Click the Device Settings tab.
3. Click the External Fonts option. The Properties button appears.
4. Click the Properties button. The Font Installer dialog box appears.
5. The external fonts that are installed appear in the Installed Fonts window. Select the fonts that
you want to remove, and then click Remove. The fonts are removed.
6. Click OK to close the Font Installer dialog box.
Installable Options
This section provides information to configure the printing options that you can install for the HP Color
LaserJet CM1015 MFP/CM1017 MFP. The following controls are available:
●
Tray 3
●
Allow Manual Duplexing
●
Printer Memory
●
Mopier Mode
●
PostScript Passthrough (PS Emulation Unidriver only)
●
JPEG Passthrough (PS Emulation Unidriver only)
Tray 3
The default for this control is Not Installed. If you purchase the optional Tray 3, you can use the drop-
down menu to configure the tray.
Allow Manual Duplexing
Use this setting to allow printing on both sides of a page by using manual two-sided printing.
Printer Memory
This option matches the setting to the amount of memory that is installed in the MFP. The driver
generates ranges of memory that can be selected, up to the maximum that the MFP can accept. The
driver can use this information to manage how the print driver uses the MFP memory.
252 Chapter 5 HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows