User Guide

Figure 6-15 HP Setup Assistant – Select Device
NOTE If you have not yet connected the product to your computer, the No devices found
message appears instead of a list of HP MFPs. Connect the product to the computer with the
USB cable, turn on the HP Color LaserJet CM1015 MFP/CM1017 MFP, and then click Rescan
USB. The HP Color LaserJet CM1015 MFP/CM1017 MFP appears in the list box.
When you click USB, the HP Color LaserJet CM1015 MFP or HP Color LaserJet CM1017 MFP name
appears in the list box. Click the product name, and then clickNext to the open the User
Identification dialog box.
When you click TCP/IP and then click, Create, a text-entry dialog box opens and you can type the
network address or name for the HP Color LaserJet CM1017 MFP.
Click Back to return to the Introduction dialog box.
Click the Rescan button to scan the system again and locate the designated product connection.
270 Chapter 6 Macintosh ENWW
Macintosh