User Guide

Figure 2-51 Set up E-mail Alerts screen
E-mail messages can be sent when certain events occur at the product. Select the specific events for
notification.
To use this feature, use a valid e-mail address, select the events for notification, configure the SMTP
e-mail server that will be used to send the e-mail message, and then click Apply to save the settings.
Up to two e-mail addresses can be configured to receive separate e-mail messages for separate events.
To ensure that the proper e-mail addresses have been used and that the SNMP server information is
valid, click the Test E-mail Settings button.
NOTE Click Apply to make the changes take effect.
72 Chapter 2 Software description ENWW
Software description