User Manual

Table 7-1 Supplies status messages (continued)
Control panel message Description Recommended action
Magenta cartridge low The product indicates when a supply level is
low. Actual print cartridge life might vary.
You do not need to replace the print
cartridge at this time unless print quality is no
longer acceptable.
If print quality is no longer acceptable,
replace the print cartridge. Consider
purchasing a replacement cartridge so it is
available when the installed cartridge has
reached the end of its estimated life.
Magenta cartridge very low The product indicates when a supply level is
very low. Actual print cartridge life might
vary. Consider having a replacement print
cartridge available to install when print
quality is no longer acceptable. You do not
need to replace the print cartridge at this
time unless print quality is no longer
acceptable. After an HP supply has reached
the very low threshold, the HP premium
protection warranty for that supply has
ended.
If print quality is no longer acceptable,
replace the print cartridge.
Replace <color> cartridge The product indicates when a supply level is
at its estimated end of life. The actual life
remaining might be different than the
estimation. Have a replacement supply
available to install when print quality is no
longer acceptable. The supply does not need
to be replaced now unless the print quality is
no longer acceptable. After an HP supply
has reached its approximated end of life,
HP’s premium Protection Warranty on that
supply ends.
Replace the specified color cartridge.
Or, configure the product to continue
printing by using the Manage Supplies
menu.
Replace fuser kit The product indicates when the fuser kit is at
its estimated end of life. The actual life
remaining might be different than the
estimation. Have a replacement fuser kit
available to install when print quality is no
longer acceptable. The fuser kit does not
need to be replaced now unless the print
quality is no longer acceptable. After the
fuser kit reaches its approximated end of life,
HP’s premium Protection Warranty on that
fuser kit ends.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
1. Open the right door.
2. Grasp the blue handles on both sides of
the fuser and pull straight out to remove
it.
3. Install the new fuser.
4. Close the right door.
Replace supplies Two or more supplies are at the estimated
end of life. The actual life remaining might
be different than the estimation. Consider
having replacement supplies available to
install when print quality is no longer
acceptable. The supply does not need to be
replaced now unless the print quality is no
longer acceptable. After an HP supply has
reached its approximated end of life, HP’s
premium Protection Warranty on that supply
ends.
Touch the Supplies button to see which
supplies need to be replaced.
Or, configure the product to continue
printing by using the Manage Supplies
menu.
122 Chapter 7 Manage supplies ENWW