User Manual

●
–
●
+
●
X
●
P
When entering a phone number from the numeric keypad, include any pauses or other numbers, such
as area codes, access codes for numbers outside a PBX system (usually a 9 or 0), or a long-distance
prefix. A two second pause may be included by typing a comma (,). If the fax prefix setting has been
set to automatically include the dialing prefix, you will not need to enter it.
NOTE: When a fax is sent, it is first scanned and stored into memory. After the entire document is
stored, it is sent and then deleted from memory. Faxes that fail to send, because the number was busy
or did not answer, are deleted from memory. If the Redial On Busy or Redial On No Answer features
are set, the fax will not be deleted until all retries fail or the fax is sent successfully.
Send a fax by entering numbers manually
1. Place the document in the automatic document
feeder (ADF) or on the scanner glass.
2. From the Home screen, touch the Fax button.
You may be prompted to type a user name
and password.
3. Touch the More Options button. Verify that the
settings match those of your original. When all
settings are completed, touch the up arrow to
scroll to the main Fax screen.
ENWW
Use Fax
237