User Manual

If the Network Address button is not visible, you can find the IP address or host name by printing a
configuration page.
a. At the product control panel, scroll to and touch the Administration button.
b. Open the following menus:
●
Reports
●
Configuration/Status Pages
●
Configuration Page
c. Touch the View button to view the information on the control panel, or touch the Print button
to print the pages.
d. Find the IP address on the Jetdirect page.
5. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure
the IP address. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address.
Install the software
1. Quit all programs on the computer.
2. Install the software from the CD.
3. Click the product icon, and follow the onscreen instructions.
4. Click the Close button when the installation is complete.
5.
At the computer, open the Apple menu
, click the System Preferences menu, and then click
the Print & Fax icon.
6. Click the plus symbol (+).
60 Chapter 4 Use the product with Mac ENWW