User Manual

By default, Mac OS X uses the Bonjour method to find the driver and add the product to the
printer pop-up menu. This method is best in most situations. If Mac OS X cannot find the HP printer
driver, an error message displays. Reinstall the software.
If you are connecting the product to a large network, you might need to use IP printing to connect
rather than Bonjour. Follow these steps:
a. Click the IP Printer button.
b. From the Protocol drop-down list, select the HP Jetdirect-Socket option. Enter the IP
address or host name for the product. From the Print Using drop-down list, select the
product model if one is not already selected.
7. To configure the product to recognize the installed accessories, complete these steps:
Mac OS X 10.4 1.
From the Apple menu
, click the System Preferences menu and then
click the Print & Fax icon.
2. Click the Printer Setup button.
3. Click the Installable Options menu.
4. Configure the installed options.
Mac OS X 10.5 and 10.6 1.
From the Apple menu
, click the System Preferences menu and then
click the Print & Fax icon.
2. Select the product in the left side of the window.
3. Click the Options & Supplies button.
4. Click the Driver tab.
5. Configure the installed options.
NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should
automatically configure the installed options.
8. Print a page from any program to make sure that the software is correctly installed.
Remove software from Mac operating systems
You must have administrator rights to remove the software.
1. Open System Preferences.
2. Select Print & Fax.
3. Highlight the product.
4. Click the minus (-) symbol.
ENWW
Software for Mac
61