User Manual

Connect with USB

This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a

cable that is no longer than 2 m (6.5 ft).

CAUTION: Do not connect the USB cable until the installation software prompts you to connect it.

CD installation

1. Quit all open programs on the computer.

2. Install the software from the CD, and follow the onscreen instructions.

3. When prompted, select the Directly connect to this computer using USB cable option,

and then click the Next button.

4. When the software prompts you, connect the USB cable to the product and the computer.

5. At the end of the installation, click the Finish button, or click the More Options button to install

more software.

6. On the More Options screen, you can install more software, or click the Exit button.

7. Print a page from any program to make sure that the software is correctly installed.

NOTE: If the installation failed, reinstall the software.

Connect to a network

You can configure network parameters from the control panel, the HP Embedded Web Server, or for

most networks, from the HP Web Jetadmin software.

NOTE: HP Web Jetadmin software is not supported on Mac OS X operating systems.

ENWW

Connect with USB