Owner manual

●
Top left: The staple is in the top left corner of the short edge of the paper.
●
Top right: The staple is in the top right corner of the long edge of the paper.
1
2
1 Top left corner of the short edge of the paper
2 Top right corner of the long edge of the paper
Configure the operation mode
Use this procedure to configure how the product sorts jobs into the output bins.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Stapler/Stacker Settings
●
Operation Mode
3. Select a mode from the list of options, and then touch the Save button. The following options are
available:
●
Stacker: The product stacks jobs in the bins from bottom to top.
●
Mailbox: The product places jobs in different bins according to the person who sent them.
●
Function Separator: The product places jobs in different bins according to product function such as
print jobs, copy jobs, or fax jobs.
ENWW Configure the stapling mailbox accessory 27