User Guide

13.FF.FF Jam in right door ........................................................ 262
13.WX.YZ Jam in Tray <X> ...................................................... 263
20.00.00 Insufficient memory: <Device> To continue, touch “OK” 263
21.00.00 Page too complex To continue, touch “OK” ................. 264
30.01.23 Scanner calibration failure ........................................ 264
30.01.36 Upgrade Error Try downloading upgrade again .......... 264
30.01.43 Scan memory failure To continue turn off then on ......... 264
30.01.YY Scanner failure To continue turn off then on ................. 265
30.WX.YZ Scanner fan failure To continue turn off then on .......... 265
31.01.03 Document feeder pick error ....................................... 266
31.01.47 Document feeder not detected .................................... 266
31.03.22 Scanner calibration failure ........................................ 266
31.WX.10 Scanner failure To continue turn off then on ................ 266
31.WX.15 Jam in document feeder ........................................... 267
32.1C.XX ............................................................................... 267
32.21.00 ............................................................................... 271
33.02.01 ............................................................................... 272
33.WX.YZ Used board/disk installed ........................................ 272
40.00.01 USB I/O buffer overflow To continue, touch “OK” ........ 272
40.00.02 Embedded I/O buffer overflow To continue, touch “OK” 272
41.03.YZ Unexpected size in Tray <X> ..................................... 272
41.03.YZ Unexpected size in Tray <X> To use another tray, touch
"Options" ............................................................................... 273
41.05.YZ Unexpected type in Tray <X> ..................................... 273
41.05.YZ Unexpected type in Tray <X> To use another tray,
touch "Options" ...................................................................... 275
41.WX.YZ Error To use another tray, touch "Options" ................. 276
42.XX.YY ............................................................................... 277
47.FC.YZ Printer calibration failed To continue, touch “OK” ......... 277
48.01.XX Error ....................................................................... 278
49.XX.YY Error To continue turn off then on ................................ 278
50.WX.YZ Fuser error To continue turn off then on ...................... 279
51.00.YY Error To continue turn off then on ................................ 282
52.00.00 Error To continue turn off then on ............................... 283
52.00.20 Error To continue turn off then on ............................... 284
54.XX.YY Error ....................................................................... 284
55.XX.YY DC controller error To continue turn off then on ............ 285
55.XX.YY DC controller error To continue turn off then on ............ 286
56.00.01 Illegal Input Printer Error To continue turn off then on .... 286
56.00.YY Error To continue turn off then on ................................ 287
57.00.0X Error ....................................................................... 287
x ENWW