User Guide

SW1 Front Door
1. Open the right door (callout 1) to disengage the right-door switch (callout 2).
Figure 2-5 Test the front door switch (1 of 4)
2
1
2. Close the right door and check the control panel on the product for sensor response.
3. Open the front door (callout 3) to disengage the front-door switch (callout 4).
Figure 2-6 Test the front door switch (2 of 4)
3
4
4. Close the front door and check the control panel on the product for sensor response.
5. If either interlock switch failed to respond, remove the upper-front cover and right-front cover. By
removing the right-front cover, you can tell if the linkages are properly closing the switches.
ENWW
Tools for troubleshooting
109