User Guide

Remove all toner cartridges To exit press X ................................. 335
Remove at least one toner cartridge To exit press X ..................... 335
Remove shipping lock from Tray 2 ............................................. 335
Replace <color> Cartridge ....................................................... 335
Replace Document Feeder Kit ................................................... 336
Replace Fuser Kit ..................................................................... 336
Replace staple cartridge ........................................................... 336
Replace supplies ..................................................................... 337
Replace Toner Collection Unit ................................................... 337
Restricted from printing in color ................................................. 339
Roller cleaning is recommended ................................................ 339
ROM disk device failed To clear touch “Clear” ........................... 340
ROM disk file operation failed To clear touch “Clear” .................. 340
ROM disk file system is full To clear touch “Clear” ....................... 340
ROM disk is write protected To clear touch “Clear” ..................... 340
ROM disk not initialized To clear touch “Clear” .......................... 340
Rotating <color> motor To exit press X ....................................... 341
Rotating Motor ........................................................................ 341
Size mismatch in Tray <X> ....................................................... 341
Sleep mode on ....................................................................... 342
Standard top output bin full Remove all paper from bin ................ 342
Staple Cartridge low ............................................................... 342
Staple Cartridge very low To continue, touch “OK” ..................... 342
Supplies in wrong positions ...................................................... 342
Supplies low ........................................................................... 343
Supplies very low To continue, touch “OK” ................................. 343
Toner Collection Unit almost full ................................................ 343
Toner Collection Unit full .......................................................... 343
Toner Collection Unit full To continue, touch “OK” ....................... 344
Tray 2 Lifting .......................................................................... 344
Tray <X> empty: [Size] ............................................................ 345
Tray <X> empty: [Type], [Size] ................................................. 345
Tray <X> open ........................................................................ 346
Tray <X> overfilled Remove excess paper .................................. 346
Tray <X> overfilled To use another tray, touch "Options" ............. 346
Type mismatch Tray <X> .......................................................... 346
Unable to cancel firmware update job ....................................... 347
Unable to install the firmware ................................................... 347
Unsupported drive installed ...................................................... 347
Unsupported supply in use ........................................................ 348
Unsupported supply installed .................................................... 348
ENWW xv