User Guide

Unsupported supply installed To continue, touch “OK” ................. 348
Unsupported USB accessory detected Remove USB accessory ....... 348
Upgrade complete To continue turn off then on ........................... 349
USB accessory needs too much power Remove USB and turn off
then on .................................................................................. 349
USB accessory not functional .................................................... 349
USB hubs are not fully supported Some operations may not work
properly ................................................................................. 349
USB is write protected To clear touch “Clear” ............................. 349
USB needs too much power Remove USB and turn off then on ...... 350
USB not initialized To clear touch “Clear” .................................. 350
USB storage accessory removed Clearing any associated data ..... 350
USB storage device failure To clear touch “Clear” ....................... 350
USB storage file operation failed To clear touch “Clear” .............. 350
USB storage file system is full To clear touch “Clear” ................... 350
Used supply in use .................................................................. 351
Used supply installed To continue, touch “OK” ............................ 351
Warming up scanner ............................................................... 351
Wireless Configuration Mode ................................................... 351
Wireless is not configured ........................................................ 352
Wrong cartridge in <color> slot ................................................ 352
Event log messages ............................................................................................... 353
Print or view an event log ........................................................................ 354
Clear an event log .................................................................................. 354
Event log message table .......................................................................... 355
Clear jams .......................................................................................................................... 365
Common causes of jams ........................................................................................ 365
Auto-navigation for clearing jams ............................................................................ 366
Jam locations ........................................................................................................ 366
Clear jams in the document feeder .......................................................................... 367
Clear jams in the document feeder (M575c model) ................................................... 369
Clear jams in the output bin area ............................................................................ 371
Clear jams in Tray 1 .............................................................................................. 372
Clear jams in Tray 2 .............................................................................................. 374
Clear jams in the right door .................................................................................... 375
Clear jams in optional Tray 3 ................................................................................. 379
Clear jams in the lower right door (Tray 3) ............................................................... 380
Jam causes and solutions ....................................................................................... 381
Jams in the output bin ............................................................................. 381
Jams in the fuser and transfer area ........................................................... 381
Jams in the duplex area (duplex models) ................................................... 385
xvi ENWW