User Guide

Distance between defects Product components that cause the defect
27 mm Toner cartridge: primary charge roller
32 mm Toner cartridge: developer roller
44 mm Product: primary transfer roller
49 mm Toner cartridge: RS roller
50 mm Product: secondary transfer roller
63 mm ITB: secondary transfer backing roller
66 mm Product: distance from secondary transfer roller to fuser
75.5 mm Toner cartridge: OPC drum
76 mm ITB: driven roller
77 mm Fuser sleeve
78 mm Fuser pressure roller
80 mm Product: distance from primary transfer roller to secondary transfer roller for black
92 mm Toner cartridge station to station pitch: distance from the centerline of one OPC to
the centerline of the adjacent OPC
ITB: drive roller
105 mm Product: distance from registration to secondary transfer roller
Calibrate the product to align the colors
Calibration is a product function that optimizes print quality. If you experience any image-quality
problems, calibrate the product.
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance
button.
2. Open the following menus:
●
Calibration/Cleaning
●
Full Calibration
3. Touch the Start
button to start the calibration process.
4. Wait while the product calibrates, and then try printing again.
160 Chapter 2 Solve problems ENWW