User Guide

Table 2-20 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Line Voltage Normal*
Low Voltage
Enable if the product
is operating in a low
voltage environment
and you are having
problems with print
quality such as
blisters in the printed
image.
Tray 1 Normal*
Alternate
Affects how often the
product performs an
internal cleaning
procedure. Use the
Alternate setting if
you are having
problems with extra
toner on pages. In
this mode, the
product performs the
cleaning procedure
after each job that is
printed from Tray 1.
Using this mode
increases wear on all
the toner cartridges.
Background Normal*
Alternate 1
Alternate 2
Alternate 3
Use if pages are
printing with a
shaded background.
Using this feature
might reduce gloss
levels. Use the
Alternate 1 setting if
you are seeing a
shaded background
on the entire page.
Use the Alternate 2
setting if you are
seeing thin vertical
lines on the
background. The
Alternate 3 setting
applies the Alternate
1 setting and the
Alternate 2 setting at
the same time. Use
this setting if the first
two settings do not
correct the problem.
172 Chapter 2 Solve problems ENWW