User Guide

ManualsBrandsHP ManualsOtherColor Laserjet M575

Table 2-20 General Settings menu (continued)

First level Second level Third level Fourth level Values Description

Transfer Control Normal*

Alternate 1

Alternate 2

Alternate 3

Use this setting to

correct transfer issues

in print jobs. Turn this

feature on if green,

mottled images are

printed on the page.

Note that using this

mode can increase

problems with blurry

images or specks of

toner on the leading

or trailing edge of

the paper. The

Alternate 1 setting

reduces the T1 bias

and should be used

when re-transfer

occurs. The Alternate

2 setting increases

the inter-page gap.

Using this setting

reduces throughput

and might decrease

the print-cartridge

life. The Alternate 3

setting applies the

Alternate 1 setting

and the Alternate 2

setting at the same

time. Use this setting

if the first two settings

do not correct the

problem.

Fuser Temp Normal*

Alternate

If you are seeing a

faint image of the

page repeated at the

bottom of the page

or on the following

page, you should

first make sure the

Adjust Paper Types

setting and the Print

Mode setting are

correct for the type of

paper you are using.

If you continue to see

ghost images on your

print jobs, set the

Fuser Temp feature to

the Alternate setting.

174 Chapter 2 Solve problems ENWW