User Guide

Table 2-27 Manage Supplies menu (continued)
First level Second level Third level Fourth level Values Description
Supply Messages Low Message On*
Off
Use to configure
whether a message
displays on the
control panel when
supplies are getting
low, but have not yet
reached the low
threshold.
Reset Supplies New Fuser Kit No
Yes
Notifies the product
that a new supplies
kit has been
installed.
New Document
Feeder Kit
Select this option if
you have installed a
new document
feeder kit.
Manage Trays menu
To display: At the product control panel, select the Administration menu, and then select the Manage
Trays menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-28 Manage Trays menu
First level Values Description
Use Requested Tray Exclusively*
First
Controls how the product handles jobs that
have specified a specific input tray. Two
options are available:
Exclusively: The product never selects a
different tray when the user has indicated
that a specific tray should be used, even if
that tray is empty.
First: The product pulls from another tray if
the specified tray is empty, even though the
user specifically indicated a tray for the job.
Manually Feed Prompt Always*
Unless loaded
Indicate whether a prompt should appear
when the type or size for a job does not
match the specified tray and the product
pulls from the multipurpose tray instead. Two
options are available:
Always: A prompt always displays before
using the multipurpose tray.
Unless loaded: A message displays only if
the multipurpose tray is empty.
224 Chapter 2 Solve problems ENWW