User Guide

Table 2-32 Backup/Restore menu
First level Second level Third level Values Description
Backup Data Enable Scheduled
Backups
Backup Time Enter a time
Days Between Backups Enter the number of days
Backup Now
Export Last Backup
Restore Data Insert a USB drive that
contains the backup file.
Calibration/Cleaning menu
To display: At the product control panel, select the Device Maintenance menu, and then select the
Calibration/Cleaning menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-33 Calibration/Cleaning menu
First level Second level Values Description
Cleaning Settings Auto Cleaning Off*
On
Use to select the Auto Cleaning
menu or the Cleaning Interval
menu.
Cleaning Interval Select from a list of cleaning
intervals.
Use to set the interval when the
cleaning page should be printed.
The interval is measured by the
number of pages printed.
Cleaning Size Select from a list of support sizes. Select the paper size to use for
the cleaning page.
Cleaning Page Print Use to process the cleaning page
that was created by using the
Create Cleaning Page menu. The
process takes up to 1.5 minutes.
Quick Calibration Start The product automatically
calibrates itself at various times.
However, you can calibrate the
product immediately if you see
problems with print quality. Use
this feature to perform a partial
calibration. Use this calibration if
color density or tone seems
incorrect.
Before calibrating the product,
make sure that the Ready
indicator displays on the control-
panel display. If a job is in
progress, the calibration occurs
when that job is complete.
ENWW
Tools for troubleshooting
245