User Guide

33.02.01
Description
Used board disk installed.
A used formatter or hard disk from an existing printer has been placed in this printer.
Recommended action
Reinstall the used board or disk back into its original printer.
33.WX.YZ Used board/disk installed
Description
An encrypted board or disk with existing data previously locked to a different product has replaced the
original. If you continue, data is permanently lost.
Recommended action
◦
To save the data on the board or disk, turn the product off. Replace the board or disk with another
board or disk.
◦
To delete the data on the board or disk and continue, touch the OK button.
40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description
The USB buffer overflowed during a busy state.
Recommended action
1. Touch the OK button to print the transferred data. Some data might be lost.
2. Check the host configuration.
40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description
Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications
protocol might be in use.
Recommended action
1. Touch the OK button to print the transferred data. Some data might be lost.
2. Check the host configuration.
41.03.YZ Unexpected size in Tray <X>
Description
The product detected a different paper size than expected.
272 Chapter 2 Solve problems ENWW