User Guide

◦
A: Glossy film, typed or Autosense
◦
B: Transparency, typed or Autosense
◦
C: Label
◦
D: Envelope 1, Envelope 2, Envelope 3
◦
E: Rough (designated paper 1), typed or Autosense
◦
F: reserved for future fuser mode
Z = source tray
◦
1: Tray 1
◦
2: Tray 2
◦
3: Tray 3
◦
D: Duplexer
Recommended action
1. To clear message, touch the OK button.
2. If the message reappears, turn the product off and then on.
3. If the error persists, replace the DC controller PCA.
42.XX.YY
Description
Internal system failure.
Recommended action
Turn the product off, then on, and retry.
47.FC.YZ Printer calibration failed To continue, touch “OK”
Description
The product is unable to access or implement one of the image pattern files.
Y = calibration type, Z = event
◦
47.FC.00: Color plane registration (CPR) image not found at system initialization
◦
47.FC.01: CPR store image failure
◦
47.FC.02: CPR image not found
◦
47.FC.03: CPR print engine execution failure
◦
47.FC.10: Consecutive Dmax Dhalf image not found at system initialization
ENWW
Tools for troubleshooting
277