User Guide

◦
47.FC.11: Consecutive Dmax Dhalf store image failure
◦
47.FC.12: Consecutive Dmax Dhalf image not found
◦
47.FC.13: Consecutive Dmax Dhalf print engine execution failure
◦
47.FC.20: Error diffusion image not found at system initialization
◦
47.FC.21: Error diffusion store image failure
◦
47.FC.22: Error diffusion image not found
◦
47.FC.23: Error diffusion print engine execution failure
◦
47.FC.30: Drum speed adjustment Image not found at system initialization
◦
47.FC.31: Drum speed adjustment store image failure
◦
47.FC.32: Drum speed adjustment image not found
◦
47.FC.33: Drum speed adjustment print engine execution failure
◦
47.FC.40: Pulse width modulation image not found at system initialization
◦
47.FC.41: Pulse width modulation store image failure
◦
47.FC.42: Pulse width modulation image not found
◦
47.FC.43: Pulse width modulation print engine execution failure
Recommended action
1. Turn the product off and then on.
2. If the error persists, reload the firmware.
48.01.XX Error
Description
A job framework internal error has occurred.
Recommended action
No action necessary.
49.XX.YY Error To continue turn off then on
Description
A firmware error has occurred. This error can be caused by corrupted print jobs, software applications
issues, non-product specific print drivers, poor-quality USB or network cables, bad network connections
or incorrect configurations, invalid firmware operations, or unsupported accessories.
278 Chapter 2 Solve problems ENWW