User Guide

4. Carefully disconnect one connector (callout 1), and then remove the sensor.
TIP: It might be easier to disconnect the connector by using a small flat blade screwdriver.
Reinstallation tip Connect the wire harness to the replacement sensor, verify that the
connector is securely fastened, and then install the sensor in the holder.
1
5. If the error persists, contact your global business unit (BGU) to escalate the problem.
59.05.XX
Description
A drum startup or drum rotational error has occurred.
◦
XX = 06 Black drum startup error (M3)
◦
XX = 07 Black drum rotational error (M3)
◦
XX = 08 Yellow drum startup error (M1)
◦
XX = 09 Yellow drum rotational error (M1)
◦
XX = 10 Magenta drum startup error (M1)
◦
XX = 11 Magenta drum rotational error (M1)
◦
XX = 12 Cyan drum startup error
◦
XX = 13 Cyan drum rotational error (M1)
◦
XX = B0 Residual toner feed motor error (M12)
294 Chapter 2 Solve problems ENWW