User Guide

60.00.0Y Tray <Y> lifting error
Description
A tray lift motor error has occurred.
Recommended action
60.00.11: Lifter motor failure (M7)
1. Turn the product off and then on.
2. Check the connector (J142) on the DC controller PCA.
3. Check the connector (J78) on the lifter motor (M7).
4. Use the tray lifter sensor (SR9) test in the Tray/Bin Manual Sensor Test to verify that the sensor is
properly functioning. If it is not, replace the lifter drive assembly.
5. If the error persists, replace the lifter drive assembly.
61.00.01
Description
Color table read failure.
Recommended action
Turn the product off, and then on.
If the error persists, reload the firmware. If the error still persists, perform a firmware upgrade.
If the firmware upgrade does not resolve the problem, replace the hard disk.
62.00.00 No system To continue turn off then on
Description
The product experienced an internal system failure.
Recommended action
1. Turn the product off and then on.
2. Reload the firmware.
3. Perform a firmware upgrade.
4. If the error persists, replace the hard disk.
70.00.00 Error To continue turn off then on
Description
The product experienced a DC controller failure.
ENWW
Tools for troubleshooting
297