User Guide

Close front or right doors
Description
The front and right door that share a sensor and the product cannot distinguish between the front and
right doors. One or both of the doors needs to be closed.
Recommended action
1. Close the door.
2. Inspect the interlock on both the front and right doors.
3. Use the Manual Sensor Test to verify that the interlock switches are working correctly.
Close lower right door
Description
The optional paper feeder right door is open.
Recommended action
1. Open, and then close the door.
2. Use the right-door switch (SW1) test in the Tray/Bin Manual Sensor Test to verify that the switch is
properly functioning. If the switch fails the test, replace the switch.
3. Check the sensor flag on the right door assembly. If it is damaged, replace the lower right door
assembly.
Close right door
Description
A door on the right side of the product is open.
Recommended action
1. Close the right door.
2. If the error persists, run the Manual Sensor Test Sw3 right door opening/closing sensor. If the
sensor fails, replace the right door switch.
3. Check the right door sensor flag. If it is damaged, replace the right door.
4. If this product was previously serviced, reconnect the connector (J61) on the 24V interlock switch
and the connector (J100) on the DC controller PCA.
Creating cleaning page
Description
A cleaning page is being generated.
ENWW
Tools for troubleshooting
315