User Guide

Replace supplies
Description
This alert appears only if the product is configured to stop when a supplies reach the very low
threshold. Two or more supplies have reached the estimated end of life. The product indicates when a
supply level is at its estimated end of life. The actual life remaining might be different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
Recorded event codes depend on which supplies are at the end of life.
◦
10.00.70 (event code): Black toner cartridge
◦
10.01.70 (event code): Cyan toner cartridge
◦
10.02.70 (event code): Magenta toner cartridge
◦
10.03.70 (event code): Yellow toner cartridge
◦
10.23.70 (event code): Fuser kit
◦
10.31.70 (event code): Toner collection unit
◦
10.22.70 (event code): Transfer kit
Recommended action
◦
Touch the OK button to find out which supplies need to be replaced.
◦
Configure the product to continue printing by using the Manage Supplies menu.
Replace Toner Collection Unit
Description
The product indicates when a toner collection unit is at its estimated end of life.
NOTE: After a toner collection unit has reached its end of life, the HP Premium Protection Warranty
on that toner collection unit ends.
Recommended action
◦
Replace the toner collection unit.
◦
If you wish to have the toner collection unit operate past its estimated capacity, configure the
product to continue printing by using the Manage Supplies menu.
NOTE: This is not a recommended option because of the risk of overfilling the toner collection
unit, which could result in the need to service the product.
ENWW
Tools for troubleshooting
337