User Guide

Recommended action
1. Open document feeder top cover.
2. Remove any visible lint or dust from the feed rollers and the separation pad using compressed air
or a clean lint-free cloth moistened with warm water.
3. Close the document feeder top cover.
4. On the product control panel, touch the Reset button.
ROM disk device failed To clear touch “Clear”
Description
The specified device failed.
Recommended action
Touch the Clear button to clear the message.
ROM disk file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Touch the Clear button to clear the message.
ROM disk file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
Recommended action
Touch the Clear button to clear the error.
ROM disk is write protected To clear touch “Clear”
Description
The device is protected and no new files can be written to it.
Recommended action
Touch the Clear button to clear the message.
ROM disk not initialized To clear touch “Clear”
Description
The ROM disk file system must be initialized before it can be used.
340 Chapter 2 Solve problems ENWW