User Guide

NOTE: Once an HP supply has reached the full level, HP's warranty on that supply has ended.
1. Open the front door.
2. Grasp the top of the collection unit to pull it out.
3. Place the cap on the used collection unit.
4. Install the new collection unit bottom first.
5. Push the top into place.
6. Close the front door.
Toner Collection Unit full To continue, touch “OK”
Description
The toner collection unit has reached the out condition.
Recommended action
Replace the toner collection unit.
Actual supply life remaining may vary. Continuing to print without replacing might cause product
damage, toner to spill or error conditions.
NOTE: Once an HP supply has reached the full level, HP's warranty on that supply has ended.
Tray 2 Lifting
Description
This message displays on the control panel when the product power is turned on for the first time.
Recommended action
Open the right door and remove the shipping sheet. The shipping sheet is a white piece of plastic
which is placed in the transfer area to protect the transfer belt.
NOTE: The installation guide describes opening the right door and removing this sheet, but customers
might overlook this procedure.
A future version of firmware will detect the presence of the sheet and display a Remove Shipping
Sheet message on the control panel. The shipping sheet has a piece of orange tape which extends out
of the right door. However, the tape can be easily be torn off which leaves the sheet inside the right
door.
344 Chapter 2 Solve problems ENWW