User Guide

USB needs too much power Remove USB and turn off then on
Description
A USB accessory is drawing too much electrical current. Printing cannot continue.
Recommended action
Turn the product off, remove the USB accessory, and then turn the product on.
Use a USB accessory that uses less power or that contains its own power supply.
USB not initialized To clear touch “Clear”
Description
The USB device file system must be initialized before it can be used.
Recommended action
Use the embedded Web server or HP Web Jetadmin to initialize the component.
USB storage accessory removed Clearing any associated data
Description
This message displays for six seconds after removal of the USB storage accessory.
Recommended action
Touch the Hide button to remove this message.
USB storage device failure To clear touch “Clear”
Description
The specified device failed.
Recommended action
Touch the Clear button to clear the message.
USB storage file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Touch the Clear button to clear the message.
USB storage file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
350 Chapter 2 Solve problems ENWW