User Guide

First level Second level Value Description
Document Feeder Kit Count Set the total number of
pages that have been
fed through the
document feeder.
Document Feeder Kit Interval Total number of pages
since the document
feeder kit was replaced.
Clean Rollers Count
Clean Rollers Interval
ADF Count Set the total pages fed
through the document
feeder.
Flatbed Count Set the total pages
scanned from the
flatbed.
ADF Simplex Count Set the total single-sided
pages fed through the
document feeder.
ADF Duplex Count Set the total two-sided
pages fed through the
document feeder.
Copy Scan Count Set the total copy pages
that have been
scanned.
Send Scan Count Set the number of
scanned pages sent to
email.
Fax Scan Count
Copy Pages Count Set the number of
scanned pages that
have been printed.
Scanner Settings ADF Settings Leading-edge
Trailing-edge
Left Side Front
Left Side Back
Set the calibration
values.
WARNING! Do not
change these values
unless instructed to do
so.
Glass Settings Leading edge
glass
Left Side
Glass
Serial Number Set the serial number.
ENWW
Service mode functions
411