User Guide

Scanning/image capture system
Control panel
The control panel is a capacitive touchscreen with an adjustable viewing angle. The control panel
assembly includes a USB port for walk-up printing and firmware upgrades. It also includes a hardware
integration pocket for third-party USB devices such as card readers.
The control panel has the following features:
●
203.2 mm (8 in) full color SVGA (800 x 600 LCD) display
●
Physical external Home button
●
Ambient light sensor to automatically adjust brightness
●
Standalone diagnostic mode to assist troubleshooting
●
No calibration necessary
●
Full function QWERTY slide out keyboard (M575c model)
Scanner
The scanner is a carriage-type platen scanner which includes the frame, glass, scan module, and a
scan controller board (SCB) attached to the back of the assembly. The scanner has a sensor to detect
legal-sized media and a switch to indicate when the document feeder is opened.
The document feeder and control-panel assembly are attached to the scanner assembly. If the scanner
fails, it can be replaced as a whole unit. The scanner replacement part does not include the document
feeder, SCB, control-panel assembly, or control-panel cable.
Document feed system
This section describes the following:
●
Simplex single pass (all models)
●
Electronic duplexing (e-duplex) single pass (M575c model)
See
Document feeder operation (M575c model) on page 72
●
Duplex three pass M575dn and 575f model)
●
Legal-sensing flag
●
Pick and feed roller assembly with separation pad
●
Mechanical deskew
●
Step glass for document feeder scanning
ENWW
Scanning/image capture system
65